POLYURETHANE Pool Varnish (Waterproof)
2 C ACRYLIC POLYURETHANE RESIN
GREAT ADHERENCE AND HARDNESS
WATERPROOF Polyurethane varnish for all types of supports
It provides great adhesion, great toughness and chemical and mechanical resistance to external aggression from floor sweepers and high pressure cleaners.
It allows the permanent impounding of water, manufactured with polyurethane resins that support the chlorination and maintenance products of swimming pools, even those with salt water.
Especially suitable for varnishing and protecting sand pool liners, or waterproofing pools or jacuzzis made of gresite or tiles with small leaks.
On non-porous surfaces it is advisable to previously apply a 2C Primer
We recommend reading the instructions for use below, for its correct application.
IF YOU WANT TO KNOW MORE ABOUT TO PAINT MUST APPLY, CLICK HERE, PLEASE NOTE THE MOST APPROPRIATE TO SITUATION varnish.
COMPOSITION OF WATERPROOF POLYURETHANE VARNISH FOR POOLS
Two-component polyurethane varnish, based on a hydroxylated acrylic resin system crosslinked with aliphatic polyisocyanates.
CHARACTERISTICS OF POLYURETHANE VARNISH 2 C WATERPROOFING
Indicated for the completion and protection of interior or exterior surfaces , it provides great adhesion and flexibility, as well as great hardness and chemical and mechanical resistance
Colorless polyurethane resin for waterproofing swimming pools
Adheres to all types of surfaces (stoneware, ceramic, tiles ...)
Chemical resistant waterproofing
Resistant to the most adverse weather conditions and external aggression.
WHERE TO USE TWO-COMPONENT POLYURETHANE VARNISH?
Flexible and transparent waterproofing for all types of pools, whether made of: stoneware, tile, ceramic, sand pool liners, etc ...
It can be applied on tile or tile coverings, we recommend the prior application of a 2C EPOXY PRIMER FOR NON-POROUS SURFACES
It can be applied directly, on coatings of concrete, sand, silica, or any type of porous support, etc ...
Recommended for the protection and decoration of wood, of all types of metal surfaces, and on some plastic or PVC surfaces, also on light metals (Aluminum, galvanized, glass) both for interior and exterior.
It can be used as a two-component polyurethane primer, for plastics or irons with difficult anchoring.
HOW TO USE THE WATERPROOF TWO-COMPONENT POLYURETHANE VARNISH FOR POOLS?
We recommend waiting between 24 and 72 hours, after emptying the pool, for a perfect drying of the same, before painting.
And wait again between 5 days and two weeks, after painting or varnishing it to refill the pool with water, for a correct application. (The longer we can let it dry, the better). The maximum hardness of the product is reached after 7 days of application.
- The surfaces to be painted must be free of dust, grease and old paints or varnishes.
-If you have used salfumán or another type of strong water to clean the support or open the pore, you must clean the area with cleaning solvent or soapy water, several times, to remove the silicones that these products leave on the surface and can repel the varnish.
- For non-porous substrates, it is advisable to apply a two-component epoxy primer for non-porous surfaces beforehand.
- Mix the two components in a 4: 1 ratio and homogenize the contents of the container, stirring thoroughly.
- The application can be done with a brush, roller or air-less. For the waterproofing of swimming pools, it is recommended not to use Air-less, to improve the adherence of the product.
- The first coat will be applied by diluting 25% with our Polyurethane Solvent; for subsequent coats it will be diluted approximately 10%.
- For the waterproofing of swimming pools, it is advisable to apply at least three coats, the third coat, also diluted to 10%
- To achieve good adhesion between coat and coat, do not allow more than 24 hours to elapse.
-Let it dry properly before painting and before filling with water (minimum 72 hours). We recommend waiting 7 days before filling it
PRECAUTIONS WHEN USING TWO-COMPONENT POLYURETHANE VARNISH
Carry out good ventilation of the premises and have a good extraction system.
Use an activated carbon mask, safety glasses and protective gloves during application.
Dilute the varnish appropriately as indicated in the technical sheet.
Do not apply thick layers, so as not to bleach the support.
Let the varnish dry between coats so that no blisters or bubbles appear.
We recommend not painting in the central hours of the day. so as not to cause a very fast drying when the support is very hot. (Best to apply first thing in the morning)
Avoid applying with a very high relative humidity in the environment or with pink, contact with water, prevents a perfect anchoring of the varnish, and can cause glazes. Substrate humidity must be less than 5%
It should not be mixed or diluted with any other product or substance as the basic characteristics may be altered.
Do not use on paints or varnishes that are not two-component, as it could remove them.
PRESENTATION OF THE FIREPROOF POLYURETHANE VARNISH FOR POOLS
It comes in packages of:
For GLOSS, SATIN finish containers
Component A: 2.6 kilos and 13 kilos
Component B: 0.75 Kilos and 3 kilos
We guarantee the quality of our products in accordance with our general conditions of sale and supply.
The technical advice for the use and use of our products is given according to our best knowledge and information, the result of the tests carried out in our laboratories and our experience gathered over the years at the service of the client.
If you want to know the PRICE OF THE POLYURETHANE VARNISH, OF TWO COMPONENTS TO WATERPROOF SAND POOLS OR GRESITE POOLS OR TILES THAT HAVE FILGRATIONS .. you can consult it at the beginning of this page.
#Buy two-component polyurethane varnish WATERPROOF FOR SAND, GRESITE OR TILE POOLS
# TRANSPARENT polyurethane for WATERPROOFING POOLS
- Theoretical performance
- 4 to 6 LITER M2 X X HAND
- Minimum 8 hours / maximum 24 hours (elapsed this period, it is necessary to sand the surface for repainting)
- Brightness / Satin
- Disolvente Poliuretano
- Useful of Application
- BRUSH / ROLLER / AIRLESS
- Cleanliness Tool
- Solvent Polyurethane
- Dissolution of the first hand
- Between 20 % and 25 %
- Dissolution in the second hand
- 10% Solvent
- Transparent or colorless
- JUEGO 2.6 K Y 0.75 KGS / JUEGO 13 K Y 3KGS
- Time of dried to a temperature of 25 ºC and a relative dampness of 50 %
- TOUCH: 1 hour
- Temperature of Application
- Do not apply below 5 ° Celsius
- Proportion of the mixture
- 4: 1 (4 Epoxy parts: 1 part catalyst)
- 0.90 - 1 grs / m3
- Flame retardant B-s2, d0
- Humedad del soporte
- Inferior al 5 %
Muy buena caidad del producto y fácil de aplicar.. Me han desaparecido las pérdidas de agua en la piscina. Me he ahorrado un montón de dinero al no tener que levantar todas la piscina. Sigo en contato con vosotros para realizar un buen mantenimiento.
Barniz piscina de poliuretano
El barniz es de alta calidad y mi piscina ha quedado perfecta sin fisuras, por donde se salga el agua, además la he podido aplicar en la mia que es de baldosas y es mas complicado ya que también es muy flexible