Painting for AZULEJOS (3.75 kgs)
POLYURETHANE ENAMEL Acrylic 2C for TILE AND TILES
Paint for tiles on both walls and floors
Enamel that provides great adhesion and flexibility, great hardness and chemical and mechanical resistance.
Resistant to moisture paint for bathroom and kitchen tiles, and for floor tiles
HOW TO ASK FOR A COLOR OF THE NCS COLOR LETTERS? CLICK HERE
Product customizationDon't forget to save your customization to be able to add to cart
IF YOU WANT TO KNOW MORE ABOUT THE TILES FOR THE KITCHEN TILES AND PAINT FOR BATH TILES CLICK HERE
PAINT FOR PAINTING TILES AND TILE OF THE BATHROOM AND KITCHEN, PAINT FOR INTERIOR AND EXTERIOR TILES, BOTH FOR FLOORS AND WALLS, TILES TABLES, ETC ..
IF YOU WANT TO KNOW MORE ABOUT THE PAINTING OF TWO COMPONENTS, CLICK HERE
COMPOSITION OF THE ENAMEL OR PAINT FOR TILE AND TILES
Two-component system based on a hydroxylated acrylic resin system
cross-linked with aliphatic polyisocyanates.
ADVANTAGES OF THE ENAMEL OR PAINT FOR TILE AND TILES OF TWO COMPONENTS
Two-component polyurethane paint that provides good weather resistance and very good stability to ultraviolet light.
Painting for tiles that also stands out for its good flexibility, color retention and resistance to abrasion, with great hiding power.
It provides great hardness and chemical and mechanical resistances to the tiles and tiles painted with this paint.
Painting of two components, which does not fall off over time, nor spoil. If you want the best quality for your tiles, do not play it, use a two-component paint.
WHERE TO USE THE ENAMEL OR PAINT FOR TILE AND TILES?
Painting to change the appearance of the tiles in your bathroom and kitchen, without having to make major reforms.
Glaze for tiles that can be applied both on floors and walls, as it is passable and very resistant, thanks to its two-component catalysis.
Paint indicated to protect and decorate all types of metal supports, wood, glass, tiles, some plastic surfaces, also on light metals (aluminum, galvanized, etc. ..).
Enamel for tiles and tiles, which you can use both indoors and outdoors.
HOW TO USE DECORATIVE PAINT OR ENAMEL FOR TILE AND TILES?
-Remove the material very well, the surfaces to be painted must be dry, clean and consistent
Mix the two components and homogenize the contents of the container, stirring thoroughly.
Let stand about five minutes, and then dilute conveniently with polyurethane solvent.
On clean and degreased surfaces, eliminating any presence of oxidation.
For any other support: Consult.
In good condition.- Clean of fats, oils, dirt, to later apply according to needs.
In poor condition.- Eliminate the paint in poor condition and proceed to the application of our product.
PRECAUTIONS WHEN USING DECORATIVE ENAMEL OR PAINT FOR TILE
Perform good ventilation of the premises and have a good extraction system.
Use active carbon mask, safety glasses and protective gloves during application.
It comes in containers of:
Component A: 3 kilos and 15 kilos.
Component B: 0.75 kilos and 3 kilos.
The technical advice for the use and use of our products is based on our best knowledge and information, as a result of the tests carried out in our laboratories and our experience collected over the years at the customer's service.
ANGAR, SC will not be responsible for the problems caused by incorrect application or misuse of our products.
BUY PINTURA PARA AZULEJOS, PAINT THE TILES OF THE BATHROOM AND THE KITCHEN
BICOMPONENT PAINTING THAT GRAB IN ANY TYPE OF TILE AND TILES, BOTH OF INTERIOR AND EXTERIOR.
ENAMEL FOR PAINTING TILES AND TILE BOTH OF THE FLOOR AND THE WALL.
If you want to know the PRICE OF PAINTING FOR TILES AND TILE, both inside and outside, you can check it at the beginning of this page.
- Theoretical performance
- Between 9 and 12 square meters per Kilo and layer (Depending on the media, whether it is new or already painted)
- 8 Hora Mínimo / 24 Horas Máximo (para una perfecta adherencia)
- Brightness / Matte / Satin
- Disolvente Poliuretano
- Useful of Application
- BRUSH / ROLLER / AIRLESS
- Cleanliness Tool
- Solvent Polyurethane
- Dissolution of the first hand
- Between 20 % and 25 %
- Dissolution in the second hand
- 10% Solvent
- Juego 3.075 kgs / Juego de 18 kgs
- Time of dried to a temperature of 25 ºC and a relative dampness of 50 %
- TOUCH: 1 hour
- Temperature of Application
- Humedad del soporte, inferior al 10%
- Proportion of the mixture
- 4: 1 (4 parts of polyurethane catalyst x 1)
- Flame retardant B-s2, d0
- Humedad del soporte
- Inferior al 10 %