• -20%
Acrílica suelos Pav
Acrílica suelos Pav
Acrílica suelos Pav
Acrílica suelos Pav

Polyurethane 2C HIGH THICKNESS ( outside - inside)

€266.81 €333.51 -20%
Tax included

PAINTING POLYURETHANE 2C ALIPHATIC HIGH THICKNESS

Painting for floors with light and heavy traffic.

Painting for the floor of warehouses, industries, workshops, industrial buildings, garages ...

Painting suitable for any type of concrete floor both indoors and outdoors.

Waterproof, flexible and passable.

CLICK HERE TO KNOW HOW TO ASK FOR A COLOR OF THE RAL CHARTER

Product customization

Don't forget to save your customization to be able to add to cart
  • optional 250 char. max
KILOS
  • 14 KG ( GAME 10 + 4 )
Color
  • White
  • Brief Färbt Ral
FINISH
  • Satin

 

IF YOU WANT TO KNOW MORE ABOUT PAINTING TWO COMPONENTS, CLICK HERE

 

 IF YOU WANT TO READ MORE INFORMATION ABOUT THE 3D DECORATIVE FLOORS OR FLOORS EFFECT MIRROR CLICK HERE!

.

BUY PAINT FOR SOIL ALIHATIC POLYURETHANE TWO COMPONENTS HIGH THICKNESS

.

NATURE OF ALICIATIC POLYURETHANE PAINT 2C HIGH THICKNESS

Elastic coating, free of solvents, based on high-thickness bicomponent aliphatic polyurethane.

. 
CHARACTERISTICS OF HIGH THICKENER ALICIATIC POLYURETHANE 2C

Elastic waterproof coating.

High crack coating capacity.

Easy application

Solvent free.

Excellent mechanical properties and high resistance to abrasion.

High chemical resistance and excellent resistance to UV rays.

Excellent adhesion to concrete supports and cementitious mortars.

.

FIELDS OF APPLICATION OF HIGH THICKENER ALICIATIC POLYURETHANE 2C

Covers transited by light and heavy traffic.

Warehouses, industries, workshops, industrial buildings, garages ...

Any type of concrete floors both indoors and outdoors.

.

METHOD OF USE OF HIGH THICKENER ALICIATIC POLYURETHANE 2C

The substrate of concrete or mortar must be resistant, clean and free of defacing material as well as fats oils or any other contaminating material and free of moisture.

The surface texture should be rough and with an open pore, for this a previous treatment is recommended by sanding, milling or shot blasting.

All joints or fissures that may have movement will be treated previously. It is necessary to apply a layer of epoxy primer for sealing the surface.

The binder system is supplied in an adequate proportion of mixture, which must be done in a homogeneous and complete manner, avoiding that there are remains of product on the walls and bottom of the containers.

It is not recommended to carry out partial mixing in any case.

Mix the two components to homogenize the content of the container by stirring thoroughly for 3 min. at least at low revolutions to avoid introducing air into the product and allowing the mixture to settle for 15 minutes before applying it to the surface.

An abundant layer will be applied with roller, allowing the entire soil to be impregnated. Allow to dry for at least 24 hours but not more than 48 hours.

A well-spread second coat can be applied in the same way, allowing it to dry for at least 48 hours.

.

SAFETY AND HYGIENE OF ALIHATIC POLYURETHANE 2C HIGH THICKNESS

Perform good ventilation of the premises and have a good extraction system.

Use active carbon mask, safety glasses and protective gloves during application.

.

PRESENTATION OF ALICIATIC HIGH THICKENER POLYURETHANE 2C

Set of 14 kilos (Pack 10 kilos + catalyst 4 kgs)

.

The technical advice for the use and use of our products is based on our best knowledge and information, as a result of the tests carried out in our laboratories and our experience collected over the years at the customer's service. 
Pinturas ANGAR, SC will not be responsible for the problems caused by incorrect application or misuse of our products.

.

If you want to know THE PRICE OF THE ALIPHATIC POLYURETHANE OF TWO COMPONENTS OF HIGH THICKNESS FOR SOILS, you can consult it at the beginning of this page.

.

.

Repainted
Tiempo máximo de repintado 48 horas
Theoretical performance
0.35 - 0.60 KG /m2
FINISH
Glossed
Color
Todos los colores de la CARTA RAL
Time of dried to a temperature of 25 ºC and a relative dampness of 50 %
TIEMPO DE CURADO A 20ºc: Al tacto de 6 - 10 horas / Tráfico de personas: 24 horas / Curado Total : 7 Días
Temperature of Application
Temperatura mínima de aplicación : 5ºC
Solid in weight
100%
Density
1.30 - 1.40 grs/ cm3
Adherence to the support
ALARGAMIENTO A LA ROTURA: 60%
S17

You might also like

Reviews Reviews (1)

Based on 1 review - 0 1 2 3 4 5,00/5
0 1 2 3 4
(5/5

Industria

Puntuación total: 0 1 2 3 4

Soy dueño de una pequeña industria, compre este material para utilizarlo en mi suelo de hormigón, el resultado fue excelente.
Lo recomiendo, buena calidad y buen precio.


Product added to wishlist

Portes Gratis Angar para pedido + 75 €

iqitcookielaw - module, put here your own cookie law text