EPOXI 2C Primer (Soils with Moisture)

IF YOU WANT TO KNOW MORE ABOUT EPOXY PAINT, CLICK HERE

IF YOU WANT TO KNOW MORE ABOUT PAINTING TWO COMPONENTS, CLICK HERE

.

# EPOXY COLORLESS IMPRIMATION TWO COMPONENTS WITHOUT DIVOLVENT, 100% SOLIDS, FOR SOILS WITH MOISTURE, CAN BE USED FOR RECRECIDES WITH ARIDES.

.

NATURE EPOXY PRIMER 2C COLORLESS FOR SOILS WITH HUMIDITY

Two-component system without solvents based on epoxy resins and suitable hardeners, which is used as a primer on substrates with moisture.

.

CHARACTERISTICS OF EPOXY 2C PRIMER FOR SOILS WITH HUMIDITY

This epoxy system stands out for its excellent adherent power on supports with humidity.

It has great moisturizing power in all types of cementitious substrates (concrete or mortar)

.

FIELDS OF APPLICATION OF THE PRIMER FOR SOILS WITH HUMIDITY EPOXY 2C

System recommended as a primer for epoxy systems on supports with moisture.

Not applicable to substrates with permanent hydrostatic pressure.

.

HOW TO USE THE EPOXY 2C PRIMER FOR SOILS HUMIDITY

1. The concrete or mortar support on which it is applied must not be waterlogged, free of dust, grease and remains of poorly adhered materials.
2. Mix the two components in the indicated proportion and homogenize the contents of the container by stirring thoroughly with a stirrer at low revolutions to avoid introducing air.
3. The preparation of the support must be carried out with the appropriate machinery (diamantadora, milling machine, shot blasting machine), depending on the state of the support and subsequently vacuumed.
4. The application will be by roller or trowel depending on the thickness you want to achieve.
5. The drying time depends on the temperature and humidity, on supports with high humidity it may be necessary to wait up to 24 hours.
6. It is not advisable to apply on the dry primer after more than 48 hours.

SAFETY AND HYGIENE WHEN USING EPOXY PRIMER 2C WITHOUT SOLVENT

Perform good ventilation of the premises and have a good extraction system.

Use active carbon mask, safety glasses and protective gloves during application.

.

PRESENTATION OF THE EPOXY 2C PRIMER FOR SOILS WITH HUEMDAD

It comes in containers of:

Component A: 5.64 Kilos / 12.22 kgs

Component B: 3 kilo / 6.50 kgs

.

The technical advice for the use and use of our products is based on our best knowledge and information, as a result of the tests carried out in our laboratories and our experience collected over the years at the customer's service. 
ANGAR paints, will not be responsible for the problems caused by incorrect application of the products

.

If you want to know the prices of the primer for floors with residual moisture of Epoxy of two components, you can consult it at the beginning of the page.

.

.