Painting EPOXY TO WATER 2C (BRILLO)
PAINTING SOILS EPOXY TO WATER 2C FINISH GLOSS
Water epoxy paint for floors, with excellent adhesion, great hardness and good resistance to aggressive environments.
Recommended for its low odor and no toxicity in the food industry, hospital areas, concrete screeds, etc.
Product customizationDon't forget to save your customization to be able to add to cart
BUY PAINT FOR SOILS TO WATER OF TWO COMPONENTS, / EPOXY TO WATER 2C, IN COLORS FACTS OR IN ANY COLOR OF THE CARD RAL OR NCS (You can paint your floor in your favorite color) FINISHED GLOSS
Our two component Epoxi Water paint is CERTIFIED TO SLIDING IN CATEGORY 1 and 3, in any color of the Ral chart
NATURE OF PAINTING EPOXY WATER SOILS 2 COMPONENTS
Aqueous system of two components based on epoxy resins and emulsion hardeners.
There is ANTI-SLIP version (Consult us, we make it for you without surcharge)
CHARACTERISTICS AND ADVANTAGES OF PAINTING FOR INTERIOR SOILS EPOXY OF 2 COMPONENTS TO WATER
This type of floor paint is characterized by not containing any type of solvents, so it is totally harmless. It does not smell, and you can use the painted area at the time of drying.
The epoxy paint 2c to water, provides finishes with excellent adhesion, great hardness and very good resistance to aggressive environments. (Do not recommend for workshops where you can pour oils, or aggressive liquids.
WHERE CAN YOU APPLY THE EPOXY PAINT FOR SOILS TO WATER?
Paint for floors ideal for garages, industrial floors and warehouses, as well as in food industry, hospital areas and all types of support that have to be in contact with food, drinking water, etc ...
HOW SHOULD I USE THE EPOXY 2C PAINT TO THE WATER?
The surface to be painted must be free of dust, grease, old paint and completely dry.
The humidity of the support must be less than 20%
Do not apply below 10ºC
Mix the two components in a ratio of 1: 1 and homogenise the contents of the container, stirring thoroughly.
In new pavements it will be necessary to wait for its total setting, approximately 30 days; If the soil is not very porous, a chemical or mechanical treatment must be carried out to open and achieve better adhesion.
The application can be done with brush, roller or air-less.
The first coat will be applied by diluting the product with 20% water. for the second hand dilute no more than 10%
To achieve good adhesion between layers, do not allow more than 24 hours to elapse.
The mixture has a maximum life of 1 hour and a half.
The total hardening will not be achieved until after 7 days at temperatures not lower than 15-20ºC
SAFETY PRECAUTIONS, USING EPOXY PAINT 2C FOR FLOORS
When painting with two-component epoxy paint, you must perform good ventilation of the room and have a good extraction system.
Use active carbon mask, safety glasses and protective gloves during application.
PRESENTATION TWO COMPONENTS EPOXY WATER PAINT
COLORS: RED / GRAY / GREEN / WHITE / LETTER RAL AND LETTER NCS
It comes in containers of:
Component A: 3 and 15 kilos
Component B: 600 gr and 3 kilos
The technical advice for the use and use of our products is based on our best knowledge and information, as a result of the tests carried out in our laboratories and our experience collected over the years at the customer's service.
ANGAR paints, will not be responsible for the problems caused by incorrect application of the product
If you want to know THE PRICE OF PAINTING FOR SOILS OF INTERIOR EPOXY TO THE WATER OF TWO COMPONENTS IN MANUFACTURED COLORS OR ANY COLOR OF THE RAL COLOR CHART, you can check it at the top of the page.
- 10 - 12 horas como mínimo
- Theoretical performance
- 10 - 14 m2 x Kilo x Mano
- Brilliant in Smooth / Satin non-slip
- Useful of Application
- Brocha / Rodillo / Airless
- Cleanliness Tool
- Dissolution of the first hand
- 20 % de agua
- Dissolution in the second hand
- Between 0 % and 10 %
- ROJO / GRIS / VERDE / BLANCO / COLORES DE LA CARTA RAL
- Time of dried to a temperature of 25 ºC and a relative dampness of 50 %
- Endurecimiento total 7 Días
- Proportion of the mixture
- 5 : 1
- Useful life of the mixture
- 1 hora y media
- Slip category 3
- Humedad del soporte
- Inferior al 10 %
Muy buena calidad, esta pintura al agua para suelos me ha encantado y los resultados excelentes!!