- -20%
Acrylic SIGNAL VIAL Satin
ACRYLIC SOILS, ROAD SIGNALING, SATIN TO SOLVENT
Painting for floors specially indicated for signaling streets, garages, industrial buildings, sports tracks ....
High resistance to traction, transit and wear.
Quick drying, holds water and rubbing.
All colors mixable with each other.
BUY PAINT FOR SOILS, ACRYLIC TO SOLVENT FOR ROAD SIGNALING, AND MARK OF STRIPES AND LIMITATIONS ON THE SOIL
.
COMPOSITION OF ACRYLIC PAINT TO SOLVENT FOR ROAD SIGNALING
Painting based on solvent-based thermoplastic acrylic resin, for application on cement floors, asphalt, etc. of air drying.
.
YELLOW RAL 1023
RED RAL 3009
.
CHARACTERISTICS OF ACRYLIC PAINT FOR SOIL SIGNALING
Paint formulated with acrylic resin, with high resistance to traction and wear, speed of drying, resistance to friction and water, especially suitable for the protection and decoration of garages, industrial buildings, concrete, etc ...
- High coverage
- High performance
- Raincoat
- Great adhesion
- Tensile strength
- Resistance to alkalinity
- Abrasion resistance
- Perfect combination between elasticity and hardness.
WHERE CAN ACRYLIC PAINT APPLY FOR SOIL SIGNALING?
Due to its properties, this coating is ideal for painting and decorating floors and road signs, both in interior floors and outdoor floors.
Painting specially indicated for the painting of the lines of delimitation of garages, for the signaling of the corridors of the ships, to paint the stripes of the sports fields, tennis courts, etc ...
.
HOW SHOULD I APPLY THE ACRYLIC PAINT TO THE ROAD SIGNALING SOLVENT?
The surface to be painted must be free of dust, grease, old paint and completely dry.
Homogenize the content of the container stirring thoroughly.
If the soil is not very porous, it will be necessary to carry out a chemical or mechanical treatment to open the pore and achieve a better adherence.
On concrete or new cements will have to wait for its total setting, approximately 30 days.
The application can be done with brush, roller or air-less.
The first coat will be applied, diluting 20-25% with water; for the second hand the dilution will be 10%.
Do not apply below 5ºC
.
PRECAUTIONS WHEN USING ACRYLIC PAINTING SOLVENT FOR SOIL STRIP SIGNALING
Perform good ventilation of the premises and have a good extraction system.
Use active carbon mask, safety glasses and protective gloves during application.
.
PRESENTATION ACRYLIC PAINT FLOORS FOR SIGNALING
It comes in packages of 4.5 kilos and 23 kilos.
The technical advice for the use and use of our products is based on our best knowledge and information, as a result of the tests carried out in our laboratories and our experience collected over the years at the customer's service.
Pinturas ANGAR, SC will not be responsible for the problems caused by incorrect application or misuse of the product
.
If you want to know the PRICE OF THE ACRYLIC PAINTING TO THE SOLVENT FOR THE SIGNALIZATION OF SOILS BOTH OF INTERIOR AND EXTERIOR, you can consult it, at the beginning of this page.
.
.
- Theoretical performance
- 10 - 12 m2 x kilo x mano
- Repainted
- 6 Horas
- FINISH
- Glossed
- Solvent
- Disolvente Industrial de Secado Rápido
- Useful of Application
- Brocha / Rodillo / Airless
- Cleanliness Tool
- Industrial Dried Rapid Solvent
- Dissolution of the first hand
- Entre un 20% y un 25%
- Dissolution in the second hand
- Between 0 % and 10 %
- Color
- BLANCO / NEGRO / AMARILLO / ROJO ÓXIDO / VERDE / GRIS
- Kilos
- 4.5 KGS / 23 KGS
- Time of dried to a temperature of 25 ºC and a relative dampness of 50 %
- Al taco 60 minutos
- Temperature of Application
- No aplicar por debajo de 5º C
- Humedad del soporte
- Inferior al 10 %