• Reduced price
Barniz Mate
Barniz Mate
Barniz Mate
Barniz Mate
Barniz Mate
Barniz Mate

Waterproof coating (Acrylic solvent)

€9.08 €12.10 -25%
Tax included

WATERPROOF VARNISH thermoplastic acrylic

Waterproof coating for decks, floors, facades, wood ..

Allows the embalming   or permanent stagnation of fresh or salt water.

Prevents the penetration of moisture. Solves problems of leaks and leaks

Very Flexible, absorbing contractions and expansions.

Durable and transparent finish, fast drying, plasticized.

LITERS
Color
  • transparent
FINISH
  • Gloss
  • Satin
  • NON-SLIPPING

WATERPROOF PAINT SHOP FLOOR, terraces, facades

.

WATERPROOF ACRYLIC PAINT COMPOSITION Thermoplastic

Clear varnish formulated based on thermoplastic acrylic resins in solvent medium.

.

ADVANTAGES OF APPLYING VARNISH Waterproof SOIL, terraces, verandas

Varnish Acrylic waterproofing solvent penetrates the substrate providing, thus very durable films resistant to ultraviolet rays and abrasion.

Their most remarkable water repellency properties are preventing it from entering the substrate and allow trapped moisture to escape to the outside.

Protects from rain and moisture, reducing soiling or dirt on fixing bracket and avoiding the appearance of stain, molds, algae and lichens on walls and floors.

Waterproof varnish improves resistance against aggressive actions support both meterelógicas as frost, and the physical and detergents.

ALLOWS embalming or permanent waterlogging

.

WHERE IMPERMEABLE thermoplastic acrylic clearcoat?

Recommended for the protection and decoration of all media construction, such as l adrillo, wood, stone, masonry, mortar, concrete curing and sealing printed.

To waterproof terraces, roofs, galleries, and any porous support.

To protect walls and ceilings of moisture and mold

.

HOW TO APPLY THE PAINT thermoplastic acrylic IMPERMEABILIZANTE?

-The Surfaces to be painted must be free of dust, grease and old and well secdas paintings.

-Homogeneizar Removing the container contents thoroughly.

-The Application can be done by brush, roller or airless diluting the use or 5-10%

No dilution is necessary, taking care to spread well the varnish to avoid thick layers.

-To Achieve good adhesion between coats must not let pass more than 24 hours.

.

HOW TO APPLY THE PAINT IN SUPERIFICIES WATERPROOF POROUS CERAMIC LITTLE

-Remover Well the material surfaces to be painted must be dry, clean and consistent.

-The Surfaces to be painted must be free of dust, grease and old paint and dry well

If the surface is not porous is recommended, with an abrasive wear it chemical or mechanical anchor for the perfect paint. (Especially in the case of ceramic tiles)

-Homogeneizar Removing the container contents thoroughly.

-The Application can be done by brush, roller

In the case of ceramic tiles, you must apply a first coat with roughly 30-35% dilution solvent, for proper anchoring. In all other media can be applied of 15% dilution

-The Second hand, spreading the varnish is applied well to avoid thick, dilute 5-10% with thinner layers.

-To Achieve good adhesion between coats must not let pass more than 24 hours.

.

PRECAUTIONS ON USING THERMOPLASTIC ACRYLIC PAINT IMPERMEABLE

Make a good ventilation in the room and have a good extraction system.

Use activated carbon mask, goggles and gloves during application.

Not compatible with aromatic solvents.

.

Thermoplastic acrylic varnish PRESENTATION

It comes in bottles of 0.75 liters, 4 liters and 20 liters.

.

Technical advice for the use and application of our products are given with best knowledge and information, the result of tests conducted in our laboratories and our experience gained over the years customer service. 
ANGAR paintings, SC is not responsible for the problems caused by incorrect application of products

.

TO SEE THE PRICE OF WATERPROOF FLOOR VARNISH, facades and terraces UP TO TOP OF THE PAGE

.

.

Repainted
  Minimum 12 hours / maximum 24 hours (elapsed this period, it is necessary to sand the surface for repainting)
Theoretical performance
Between 5 and 8 square meters X Kilo X I Run (Depending on the support, if it is new or already it is painted)
FINISH
Glossed
Solvent
Disolvente Industrial de Secado Rápido
Useful of Application
BRUSH / ROLLER / AIRLESS
Cleanliness Tool
Industrial Dried Rapid Solvent
Dissolution of the first hand
Between 0 % and 10 %
Color
Transparent or colorless
Liters
0.75 L / 4 L / 20 L
Humedad del soporte
Inferior al 10 %
Termoplastico

Reviews Reviews (1)

Based on 1 review - 0 1 2 3 4 5,00/5
0 1 2 3 4
(5/5

Impermeabilizante

Puntuación total: 0 1 2 3 4

Genial, para que no penetre la humedad y por lo tanto nos hemos evitado goteras y moho.

El pedido llegó en perfectas condiciones, muchas gracias por la asistencia telefónica.


Product added to wishlist
Product added to compare.

Portes Gratis Angar para pedido + 75 €

iqitcookielaw - module, put here your own cookie law text