Paint IRON POLYURETHANE 2C (CERTIFICATE AGAINST FIRE)
ENAMEL AGAINST FIRE, ACRYLIC POLYURETHANE 2 COMPONENTS, for IRON
BS2 CLASSIFICATION, d0 AGAINST FIRE
High quality paint for Lacar Hierro, renew windows, doors, radiators and iron furniture in your home.
Suitable for lacquering and decorating Iron, Crystal, some light materials such as Aluminum, Galvanized.
Product customizationDon't forget to save your customization to be able to add to cart
IF YOU WANT TO KNOW MORE ABOUT THE IGNÍFUGA PAINT, CLICK HERE
IF YOU WANT TO KNOW MORE ABOUT THE PAINTING OF TWO COMPONENTS, CLICK HERE
BUY TWO COMPONENT POLYURETHANE ENAMEL, BS2D0 CERTIFICATE IGNIFUGO
NATURE AND COMPOSITION OF BICOMPONENT POLYURETHANE ENAMEL FOR IRON
Two-component system based on a hydroxylated acrylic resin system
crosslinked with aliphatic polyisocyanates.
Finish: Glossy / Satin / Textured
Density: 1.10-1.40 grs / cm3 (slight variations depending on the color)
Theoretical yield: 10-12 m2 / Kg
Repainting: 8 hours minimum
Drying: touch 60 minutes
Diluent: Polyurethane Solvent
Colors: White, Black, Ral or Ncs Letter
CHARACTERISTICS AND ADVANTAGES OF POLYURETHANE PAINTING OR ENAMEL FOR TWO COMPONENTS IRON
Two component system that provides good weather resistance and a very good resistance to ultraviolet light.
Standing out also for its good flexibility, color retention and abrasion resistance, with great covering power.
It provides great hardness and chemical and mechanical resistance.
Top quality paint for a perfect finish for decorating any piece of iron.
With a two-component iron enamel, a yellowish-resistant coating is obtained, with good gloss retention, and excellent resistance to the outside, water and chemical agents.
This iron paint is characterized by its good elasticity and adhesion, even on difficult surfaces, however, it has a very high hardness.
FIELDS OF APPLICATION OF PAINT OR ENAMEL FOR IRON OF ACRYLIC POLYURETHANE 2C
Indicated to protect and decorate all types of metal supports, wood, glass, some plastic surfaces, also on light metals (Aluminum, galvanized, etc ..).
Paint that due to its high quality, is especially suitable for lacquering all types of iron. Paint to lacquer radiators, iron windows and doors, tables, chairs and iron benches, both indoor and outdoor.
HOW DO I HAVE TO APPLY THE INDUSTRIAL POLYURETHANE ENAMEL OF TWO COMPONENTS FOR IRON?
-Remove the material very well, the surfaces to be painted must be dry, clean and consistent.
Mix the two components in a 4: 1 ratio and homogenize the contents of the container, stirring thoroughly.
The application can be done by brush, roller or airless (we recommend for a perfect lacquer, the use of gun or airless).
The first polyurethane enamel for iron will be applied, diluting 25% with polyurethane solvent, and for the next hands it will be diluted with approximately 10%.
On clean and degreased surfaces, eliminating any presence of oxidation.
For any other support: Consult.
In good condition.- Clean of grease, oils, dirt, and then apply according to needs.
In poor condition.- Remove the paint in poor condition and proceed to the application of our product.
SAFETY AND HYGIENE when applying 2c industrial enamel for iron
Perform good ventilation of the premises and have a good extraction system.
Use active carbon mask, safety glasses and protective gloves during application.
PRESENTATION OF POLYURETHANE ENAMEL 2C
It comes in packages of:
Component A: 3 kilos and 15 kilos.
Component B: 0.75 kilos and 3 kilos.
We guarantee the quality of our products in accordance with our general conditions of sale and supply.
The technical advice for the use and use of our products are given according to our best knowledge and information, fruit of the tests carried out in our laboratories and our experience gathered over the years at the service of the client.
If you want to know the PRICE OF THE PAINT OR ENAMEL FOR IRON POLYURETHANE OF TWO COMPONENTS, you can consult it at the top of this page.
- 8 Hora Mínimo / 24 Horas Máximo (para una perfecta adherencia)
- Theoretical performance
- 10 - 12 m2 X Kilo X Mano
- SATINADO / BRILLO / TEXTURADO
- Disolvente Poliuretano
- Useful of Application
- Brocha / Rodillo / Airless ( Para un perfecto Lacado, recomendamos utilizar Pistola o Airless)
- Cleanliness Tool
- Solvent Polyurethane
- Dissolution of the first hand
- Between 20 % and 25 %
- Dissolution in the second hand
- 10% Solvent
- BLANCO / NEGRO / CARTA RAL / CARTA NCS
- JUEGO 3.750 KILOS (3 + 0.75 ) // JUEGO DE 18 KGS. (15 + 3)
- Time of dried to a temperature of 25 ºC and a relative dampness of 50 %
- Al tacto 60 Minutos
- Temperature of Application
- Do not apply below 5 ° Celsius
- Proportion of the mixture
- 4 : 1 (4 partes de poliuretano x 1 parte de catalizador)
- Flame retardant B-s2, d0
- Humedad del soporte
- Inferior al 10 %