Painting anticaloric 600 DEGREES (ALUMINIUM AND BLACK)
GLAZE anticalórico UP TO 600 DEGREES
Color BLACK (1k / 5k / 26 kgs) ALUMINUM (0.75K / 5 kgs)
Iron paint heat resistant up to temperatures of 600 °.
Apply inside on surfaces to withstand high temperatures: Fireplaces, boilers, exhaust pipes, ovens, barbecues, motor housings, radiators, etc.
Anticaloric paint for iron exposed to high heat sources
BUY PAINT FOR IRON anticaloric supports up to 600th IN BLACK METALLIC COLORS AND ALUMINIUM
COMPOSITION OF POLISH IRON OR PAINTING anticaloric
Topcoat based on silicone resins and pigments recommended high heat resistance to withstand temperatures up to 600 °
CHARACTERISTICS OF POLISH IRON OR PAINTING anticaloric IN BLACK AND METALLIC ALUMINUM
Black metallic look finish or 250 from the organic portion of the coating is burned and is an inorganic lattice (SiO2) x adhered, with good weather resistance.
WHERE TO USE paint or enamel anticalórico IRON TO 600
For application indoors on surfaces to withstand high temperatures, such as chimneys, boilers, exhaust pipes, ovens, engine housings, etc.
Iron or paint exposed to temperatures up to 600 degrees metal surfaces.
HOW TO USE OR USING THE IRON enamel or paint to anticaloric?
Homogenize the contents of the package thoroughly stirring.
Apply rust-free steel, corrugated iron, oil or other impurities. We recommend a light sanding and inadvisable previous primers.
Dilute with Synthetic Industrial conveniently fast drying solvent.
Application can be by brush, roller or spray.
Utensil cleaning solvent synthetic.
A thickness of not more than 40 microns in wet layer (dry layer 20) is recommended to achieve optimal conditions.
The total curing of the paint is achieved only after subjecting it to over 250 ° C.
If the temperature of the objects to be painted does not exceed 200 ° C is recommended to use the Aluminium Affairs
PRECAUTIONS WHEN USING PAINT GLAZE O IRON anticaloric
Make a good ventilation in the room and have a good extraction system.
Mask combined use of activated charcoal particles, goggles and gloves during application.
PRESENTATION OF POLISH IRON AND BLACK anticalórico color aluminum metallic
It is available in packs of:
0.75 Kilos aluminum and 5 kg
Black 1 kg / 5 kg and 26 kg.
Technical advice for the use and application of our products are given with best knowledge and information, the result of studies
in our laboratories and our experience gained over the years customer service.
Paintings ANGAR SC will not be responsible for problems caused by incorrect application or misuse of our products.
If you want to know the PAINT FOR IRON anticaloric PRICE OR THE PRICE OF POLISH anticalórico IRON UP TO 600 DEGREES, you can consult the top of this page.
- Theoretical performance
- Aluminum: 20/25 m2 x kg x Hand // Black: 12-15 m2 x kg x Hand
- 2 hours
- Disolvente Industrial de Secado Rápido
- Useful of Application
- BRUSH / ROLLER / AIRLESS
- Cleanliness Tool
- Industrial Dried Rapid Solvent
- Dissolution of the first hand
- Between 10 % and 20 %
- Dissolution in the second hand
- Between 10% and 15%
- NEGRO / ALUMINIO
- BLACK: 1 KGS / 5 KGS / 26 KGS // ALUMINIUM: 0.75 KGS / 5 KGS
- Time of dried to a temperature of 25 ºC and a relative dampness of 50 %
- To the tact 30 minutes
- Temperature of Application
- Between 5 and 35 centigrade degrees
- Thickness of the cap
- 15/20 micron Dry Layer
- Humedad del soporte
- Inferior al 10 %