Polyurethane 2C HIGH THICKNESS ( outside - inside)
PAINTING POLYURETHANE 2C ALIPHATIC HIGH THICKNESS
Painting for floors with light and heavy traffic.
Painting for the floor of warehouses, industries, workshops, industrial buildings, garages ...
Painting suitable for any type of concrete floor both indoors and outdoors.
Waterproof, flexible and passable.
Product customizationDon't forget to save your customization to be able to add to cart
IF YOU WANT TO READ MORE INFORMATION ABOUT THE 3D DECORATIVE FLOORS OR FLOORS EFFECT MIRROR CLICK HERE!
BUY PAINT FOR SOIL ALIHATIC POLYURETHANE TWO COMPONENTS HIGH THICKNESS
NATURE OF ALICIATIC POLYURETHANE PAINT 2C HIGH THICKNESS
Elastic coating, free of solvents, based on high-thickness bicomponent aliphatic polyurethane.
CHARACTERISTICS OF HIGH THICKENER ALICIATIC POLYURETHANE 2C
Elastic waterproof coating.
High crack coating capacity.
Excellent mechanical properties and high resistance to abrasion.
High chemical resistance and excellent resistance to UV rays.
Excellent adhesion to concrete supports and cementitious mortars.
FIELDS OF APPLICATION OF HIGH THICKENER ALICIATIC POLYURETHANE 2C
Covers transited by light and heavy traffic.
Warehouses, industries, workshops, industrial buildings, garages ...
Any type of concrete floors both indoors and outdoors.
METHOD OF USE OF HIGH THICKENER ALICIATIC POLYURETHANE 2C
The substrate of concrete or mortar must be resistant, clean and free of defacing material as well as fats oils or any other contaminating material and free of moisture.
The surface texture should be rough and with an open pore, for this a previous treatment is recommended by sanding, milling or shot blasting.
All joints or fissures that may have movement will be treated previously. It is necessary to apply a layer of epoxy primer for sealing the surface.
The binder system is supplied in an adequate proportion of mixture, which must be done in a homogeneous and complete manner, avoiding that there are remains of product on the walls and bottom of the containers.
It is not recommended to carry out partial mixing in any case.
Mix the two components to homogenize the content of the container by stirring thoroughly for 3 min. at least at low revolutions to avoid introducing air into the product and allowing the mixture to settle for 15 minutes before applying it to the surface.
An abundant layer will be applied with roller, allowing the entire soil to be impregnated. Allow to dry for at least 24 hours but not more than 48 hours.
A well-spread second coat can be applied in the same way, allowing it to dry for at least 48 hours.
SAFETY AND HYGIENE OF ALIHATIC POLYURETHANE 2C HIGH THICKNESS
Perform good ventilation of the premises and have a good extraction system.
Use active carbon mask, safety glasses and protective gloves during application.
PRESENTATION OF ALICIATIC HIGH THICKENER POLYURETHANE 2C
Set of 14 kilos (Pack 10 kilos + catalyst 4 kgs)
The technical advice for the use and use of our products is based on our best knowledge and information, as a result of the tests carried out in our laboratories and our experience collected over the years at the customer's service.
Pinturas ANGAR, SC will not be responsible for the problems caused by incorrect application or misuse of our products.
If you want to know THE PRICE OF THE ALIPHATIC POLYURETHANE OF TWO COMPONENTS OF HIGH THICKNESS FOR SOILS, you can consult it at the beginning of this page.
- Theoretical performance
- 0.35 - 0.60 KG /m2
- Tiempo máximo de repintado 48 horas
- Todos los colores de la CARTA RAL
- Time of dried to a temperature of 25 ºC and a relative dampness of 50 %
- TIEMPO DE CURADO A 20ºc: Al tacto de 6 - 10 horas / Tráfico de personas: 24 horas / Curado Total : 7 Días
- Temperature of Application
- Temperatura mínima de aplicación : 5ºC
- Solid in weight
- 1.30 - 1.40 grs/ cm3
- Adherence to the support
- ALARGAMIENTO A LA ROTURA: 60%
Soy dueño de una pequeña industria, compre este material para utilizarlo en mi suelo de hormigón, el resultado fue excelente.
Lo recomiendo, buena calidad y buen precio.