IRON Industrial Paint (Matte / Satin)

BUY PAINT FOR INDUSTRIAL IRON IN MATTE OR SATIN FINISH. BUY QUICK DRY SYNTHETIC ENAMEL FOR IRON IN SATIN OR MATTE TERMINATION

NATURE OF SYNTHETIC ENAMEL FOR FAST DRY IRON

Synthetic enamel based on short alkyd resins in oil.

TECHNICAL DATA

Finish: Matte / Satin

Density: 1.15-1.40 grs / cm3 (slight variations depending on color)

Theoretical yield: 11-14 m2 / liter

Repainting: 6-7 hours

Diluent: Synthetic Solvent

Colors: Black and White

CHARACTERISTICS OF THE FAST DRYING INDUSTRIAL ENAMEL FOR IRON ON MATTE AND SATIN

- The Matte and Satin Industrial Enamel is characterized by its rapid drying and high resistance to aggressive environments.

- Provides high hardness, flexible and high adhesion finishes,

-Industrial quick-drying paint, allows to handle quickly painted iron parts.

-Synthetic enamel of easy application, and very covering.

FIELDS OF APPLICATION OF INDUSTRIAL ENAMEL FOR IRON

Indicated, inside and outside, for the protection and decoration of all types of metal or wooden supports and as an intermediate layer.

Industrial paint for benches, lampposts, metal structures, and all types of iron or metal surfaces, that want to give them a matt or satin finish.

HOW TO USE THE INDUSTRIAL SYNTHETIC ENAMEL FOR IRON

- The surfaces to be painted must be free of dust, grease and old paints; on new surfaces a first coat of primer is necessary.

- Homogenize the contents of the container by stirring thoroughly.

- The application can be done by brush, roller or air-less.

- The first hand will be applied by diluting 10-20% with our Synthetic Solvent; For subsequent hands do not dilute more than 5%.

SECURITY AND HYGIENE OF QUICK DRY SYNTHETIC ENAMEL

Perform good ventilation of the premises and have a good extraction system.

Use active carbon mask, safety glasses and protective gloves during application.

PRESENTATION OF THE ENAMEL FOR INDUSTRIAL IRON

It comes in packages of 0.75 liters, 4 liters and 20 liters.

We guarantee the quality of our products in accordance with our General Terms and Conditions of Sale and Delivery.
Our advice on application technologies, whether verbal, written or through testing, is based on our current level of knowledge and experience. These are simple instructions that do not affect our responsibility and do not exempt you from the need to check for yourself whether the products we supply comply with the procedures and objectives you seek, carrying out your own controls and tests. The application and use of the products is beyond our control and is therefore solely your personal responsibility. We cannot be held responsible for results other than those presented here. Our security recommendations do not prevent you from defining your own measures, adapted to the conditions of your systems. We reserve the right to change the data contained herein without prior notice based on technological advances.

If you want to know the PRICE OF THE INDUSTRIAL SYNTHETIC ENAMEL OF QUICK DRYING, OR THE PRICE OF THE PAINT FOR INDUSTRIAL IRON IN MATTE OR SATIN FINISH IN BLACK AND WHITE COLOR, you can consult it at the beginning of this page.