Synthetic Colors Varnish (Solvent)
VARNISH FOR WOOD TINTED IN COLORS (AL SOLVENT)
Solvent wood protector, closed pore with UV filter to protect it from the sun
PHOTOS OF EXTENSIONS APPLIED ON NATURAL PINE TO TWO HANDS
LASUR IN COLOR WALNUT, OAK, AMERICAN OAK, MAHOGANY / SAPELI
Coating tinted in Walnut, Oak, American Oak, Mahogany and Sapeli colors. It provides films of great hardness and resistance to rubbing and abrasion.
Does not leave traces of the brush.
Very suitable for the protection and decoration of wood indoors and outdoors.
Fully washable even with household detergents.
Varnish ideal for: Pergolas, fences, trusses, doors, windows and garden furniture that you want to varnish with a closed pore, creating a waterproof layer.
SI TIENES DUDES WHAT TYPE OF BARNIZ PUEDES TO USE, CLICK HERE AND WE RECOMMEND YOU THE BARNIZ THAT YOU MUST USE IN EACH SITUACIÓN.
COMPOSITION OF THE SYNTHETIC VARNISH TO THE SOLVENT IN COLORS
Glycerophthalic or synthetic varnish, of maximum duration outdoors and indoors.
Closed pore varnish.
CHARACTERISTICS AND ADVANTAGES OF SYNTHETIC VARNISH WITH COLOR-TINTED SOLVENT
Solvent Synthetic Varnish is indicated for varnishing furniture, seats and counters, where they have to resist rubbing or abrasion.
It has excellent brushiness, it does not tear and it is totally washable even with household detergents. It does not leave any trace of the brush or the slightest graininess, it does not tear and its satin, gloss or matte appearance is very pleasant to the touch and sight.
WHERE CAN I APPLY THE SYNTHETIC VARNISH TO THE SOLVENT IN COLORS?
The varnish is highly recommended to protect and decorate all kinds of wooden supports, both indoors and outdoors.
Varnish to protect doors, windows, shutters, even in very difficult conditions.
To varnish wood both indoors and outdoors, in a satin finish.
Varnish for any type of porous surface, both indoors and outdoors.
HOW SHOULD I APPLY THE SYNTHETIC VARNISH?
-The surfaces to be painted must be free of dust, grease and old paint.
-Homogenize the contents of the container by stirring thoroughly.
-The application can be done with a brush, roller or air-less.
-The first coat will be applied by diluting 5-10% with synthetic solvent; dilution is not required for subsequent coats.
-To achieve a good adhesion between layers, it is not necessary to allow more than 24 hours to elapse.
We guarantee the quality of our products in accordance with our general conditions of sale and supply.
The technical advice for the use and use of our products is given according to our best knowledge and information, the result of tests carried out in our laboratories and our experience gathered over the years at the customer's service.
- Theoretical performance
- 10 - 12 m2 x litro x mano
- 8 Horas mínimo
- SATINADO / BRILLO
- Disolvente Decoración
- Useful of Application
- Brocha / Rodillo / Airless
- Cleanliness Tool
- Disolvente Sintético
- Dissolution of the first hand
- Entre el 5% y el 10 %
- 0.75 LITROS / 4 LITROS / (20 litros bajo pedido)