Your cart
There are no more items in your cart
How to Maintain Tiled Pools
Changes in temperature and the passage of time are two of the main causes that start to deteriorate the surface of swimming pools. Normally, ceramic has a high durability. However, small bumps, scratches or the use of abrasive products damage its outer layer. This has a solution, and can even be prevented in a very simple way.
With this technique that we show you below, you can also waterproof tiled pools, since it offers multiple protection.
The first thing you should do is have your pool empty to work properly. In addition, this will allow you to observe its entire surface, find the damaged areas and allow the support and internal leaks to dry properly.
It is essential to respect the drying time of the pool before painting. Both the surface and the interior of the walls must be completely dry and without residual water inside. The humidity level will have to be less than 10%
Waterproofing treatment for your tile pool
If your tile is in good condition, the best thing to do is to use a waterproof varnish for your pool. This product will allow you to preserve the original color of your tiles or the mosaic, since it is transparent.
If your tiles have lost their color or are outdated, then you can apply a waterproof paint for swimming pools, in the color you want, we will manufacture it for you.
One of the advantages of repainting pools with this paint is that you will have the opportunity to completely change its color.
These varnishes or paints have great elasticity and will not be affected in the future by sudden changes in temperature and expansion and contraction of the material. In addition, they are resistant to the sun's rays and to the permanent embalming of water, even salt water.
To start working, all that is needed is to thoroughly clean the entire glass. Thus, the grip of the product will be optimal. If there are traces of paint, it is crucial that you remove them beforehand.
You will have to thoroughly clean the silicones that other products have left on the surface of the support, especially if you use abrasive products to open the pore of your pool tile (such as salfuman or strong water). To do it correctly and prevent these silicones from repelling the paint or varnish, you can use cleaning solvents or degreasers.
You must apply several coats of varnish or paint, waterproof for swimming pools on the entire surface of the pool, but always waiting for the previous one to dry completely.
If, in addition, you have a small leak in the pool, this product, both the waterproof varnish and the waterproof paint for swimming pools, is suitable for cracks that do not exceed 2 mm in thickness, we advise you to follow the application steps on the product sheet that you are going to use.
Waterproof or paint PVC, fiberglass and polyurea pools
PVC is a delicate material that requires paints that adhere well. The same is true when painting polyurea pools. However, our pool paints have a great ability to fix to the support, something that is very useful in these cases.
Comments (0)