POOLS Painting (Custom Colors)

THIS PAINT NEEDS SOLVENT, (Read more in How to Use)

WE WILL MANUFACTURE THE PAINTING FOR YOUR POOL IN THE COLOR YOU LIKE THE MOST FROM THE RAL COLOR CHART.

(You just have to enter the reference of the desired color in the text field that says Personalization of the product, and give the button that says save personalization.)

IF YOU WANT INFORMATION ON HOW TO CORRECTLY PAINT YOUR POOL, YOU CAN READ THIS ARTICLE FROM OUR BLOG! CLICK HERE !   

SOLVENT ACRYLIC POOL PAINT COMPOSITION

Pool paint formulated based on thermoplastic acrylic resin with air drying solvent.

CHARACTERISTICS AND ADVANTAGES OF THERMOPLASTIC ACRYLIC PAINT IN SOLVENT

It provides films of great hardness and resistance to abrasion, fresh water, salt water, mineral oils, pool cleaning products, acids and alkalis.

It penetrates by capillary action, making a perfect seal to the concrete, preventing the penetration of moisture, waterproofing the pool glass.

The applied films are highly flexible and absorb the contractions and expansions produced by the solar rays.

Acrylic Thermoplastic pool paint is an improved formula of chlorinated rubber pool paints, these being more modern and of better quality.

PROPERTIES OF SOLVENT THERMOPLASTIC ACRYLIC POOL PAINT

• High coverage.

• High performance.

• Waterproof

• Great Adhesion

• Tensile strength

• Alkalinity resistance.

• Abrasion resistance.

• Perfect combination of elasticity and hardness.

• Very resistant to pool cleaning products.

FIELDS OF APPLICATION OF SOLVENT ACRYLIC POOL PAINT

To paint and decorate, both indoors and outdoors, cement, concrete, metal pools.

METHOD OF USE OF SOLVENT THERMOPLASTIC ACRYLIC PAINT

We recommend waiting between 24 and 72 hours, after emptying the pool for a perfect drying of the pool, before painting.

 And wait again between 5 days and 1 week, after painting to refill the pool with water, for perfect results.

-Remove the material very well, the surfaces to be painted must be dry, clean and consistent.

-If the soil is not very porous, it will be necessary to carry out a chemical or mechanical treatment for the pore in April and achieve better adherence.

PAINTING NEW POOLS 

If you want to give a first coat to use as a primer, dilute the paint with approx. 20% solvent.

 Give one or two coats to homogenize texture and desired coverage (with a dilution of 5%). Masonry surfaces must be well dry in order to allow humidity and alkalinity levels to decrease as much as possible.

On concrete or new cements it will be necessary to wait for its total setting (30 days approx.)

PAINTING POOLS ALREADY PAINTED

If the surface to be painted is in good condition, remove dust, and apply one or two coats of special pool paint.

If the old surface is in poor condition, loose and poorly adhered surfaces should be removed and proceed as a new surface. 

PRESENTATION OF THE PAINTING FOR SOLVENT POOLS

It comes in packages of 1 KGS, 4.5 kilos and 23 kilos.

BUY SOLVENT THERMOPLASTIC ACRYLIC POOL PAINT IN BLUE COLOR

We guarantee the quality of our products in accordance with our general conditions of sale and supply.

The technical advice for the use and use of our products is given according to our best knowledge and information, the result of tests carried out in our laboratories and our experience gathered over the years at the customer's service.  

If you want to know the PRICE OF THE PAINTING FOR THERMOPLASTIC ACRYLIC POOLS IN SOLVENT IN THE BLUE POOLS COLOR, you can consult it at the beginning of this page.