SATIN primer monolayer (Painting Finish)

SATIN primer monolayer (Painting Finish)

€56.11

CORROSION PRIMER FINISH FOR IRON IN SATIN

Primer for iron with great hiding power, excellent adhesion and good corrosion protection.

Primer for metal supports

Primer because of its satin finish, the films are decorative form, so can be used as FINISH FOR INTERIOR PAINTING

MINIMUM ORDER 100 GALLON

Product customization

Don't forget to save your customization to be able to add to cart

LITERS

4 L
16 L

Color

FINISH

Satin

INDUSTRIAL solvent Secado Rápido

€7.31 €8.60

Industrial Paint IRON (COLORS MEASURED)

€13.51 €15.90

Total insurance

NATURE

System formulated based on modified alkyd resins, anticorrosive pigments and fillers selected.

.

TECHNICAL DATA

Finish: Satin
Density: 1.30 to 1.45 g / cm3 (slight variations depending on the color)
Theoretical yield: 8-11 m2 / liter
Recoating: 4 hours
Thinner: Synthetic Industrial Solvent
Colors: Red, gray, green and Ral.

.

CHARACTERISTICS

- Satin Primer Topcoat films provides high coverage, excellent adhesion and good corrosion protection.

- Due to its satin finish forming films are decorative, so can be used as topcoat indoors.

FIELDS OF APPLICATION

This type of paint recommended for protection of metallic supports
used in steel structures, locksmithing, metalwork, etc ...

HOW TO USE

- The surfaces must be free of dust, grease or any dirt.

If rusty eliminate corrosion by sanding or brushing with abrasive preferably barbed blasted steel to grade Sa 2½ ISO 8501-1 surfaces.

- Mix the contents of the package thoroughly stirring with a mechanical stirrer and subsequently adding the appropriate solvent for your application:

Brush ................... 0-5% Thinner RL
Roll .................... 0-5% Thinner RL
Airbrush gun ... 20-25% Solvent RL
Airless .......... 10-15% Solvent RL

HEALTH AND SAFETY

Make a good ventilation in the room and have a good system
extraction.
Using activated carbon mask, safety goggles and protective gloves
during application.
For more information see the corresponding Data Sheet Safety
product.

PRESENTATION

It is available in packs of 4 liters and 16 liters.

Theoretical performance: Between 9 and 12 square meters per Kilo and layer (Depending on the media, whether it is new or already painted)
Repainted: Between 3 and 4 hours
FINISH: Glossed
Solvent: Disolvente Industrial de Secado Rápido
Useful of Application: BRUSH / ROLLER / AIRLESS
Cleanliness Tool: Industrial Dried Rapid Solvent
Dissolution of the first hand: Between 0 % and 10 %
Humedad del soporte: Inferior al 10 %