ANTI-MOLD Smooth Coating

NATURE

Aqueous coating based on pure acrylic resins in emulsion.

Washability greater than 5,000 double passes according to UNE 48 284

TECHNICAL DATA

• Matte finish
• Theoretical yield: 10-12 m ^{2 /litre}
• ^{Recoat 3-4 hours}
• ^{Application tools: Brush, roller or air-less}
• ^{Useful Cleaning: Water}
• ^{1st coat dilution: 10-20% water}
• ^{2nd coat dilution: 0-10% water}

FEATURES

The smooth coating provides films with very good adhesion and is permeable to water vapour.

It gives the support impermeability, hardness and flexibility, as well as little adhesion of dust and dirt.

Its wide range of colors allows decorative finishes, as well as protectors.

Also available in Anti-Mold quality.

FIELDS OF APPLICATION

Outdoors, the protection and decoration of facades and roofs is recommended, whether they are corrugated iron or with polyurethane-type insulating coatings.

In its Anti-Mold mode, indicated indoors to decorate and protect in industry and shops, where its activity favors the appearance of fungi, due to steam condensation or high temperatures.

HOW TO USE

-The surface to be painted must be free of dust, grease and old paint; for this it will be convenient to scratch or prepare the support with a sealing varnish.

-Homogenize the contents of the container, stirring thoroughly.

-The application can be done with a brush, roller or air-less.

-The first coat will be applied by diluting 10-20% with water; for the second coat it can be diluted up to 10% or applied to use.

-Do not apply below 5 ^ºC.