Iron Zinc PHOSPHATE decoration painting (Gloss / Satin)

COMPOSITION OF SYNTHETIC ENAMEL FOR IRON Zinc PHOSPHATE IN GLOSSY OR SATIN IN SLOW DRYING.

 

Alcidic enamel formulated based on polyurethane modified resins, highly stable pigments and carefully selected additives.
 

 

CHARACTERISTICS AND ADVANTAGES OF DECORATIVE PAINT OR SYNTHETIC Zinc PHOSPHATE ENAMEL FOR SLOW DRY IRON

 

- Synthetic iron enamel, provides films of very good coverage, great adhesion and excellent resistance to abrasion and atmospheric agents, in addition to having good flexibility and hardness.

-It has an excellent brochabilidad and due to its high brightness and wide range of colors, it leaves highly decorative finishes.
-Enamel for iron in gloss or satin finish for interior and exterior.
-Paint for silky and smooth iron finish, very pleasant to the touch and sight.

-Zinc phosphate for iron gives great protection to the piece, great resistance to the outside, with an anticorrosive and antioxidant finish.
 

 

FIELDS OF APPLICATION TO APPLY SYNTHETIC ENAMEL FOR SLOW DRY IRON Zinc PHOSPHATE (DECORATIVE PAINT FOR IRON)

 

Finishing enamel for the decoration of all types of metal or wooden supports, both indoors and outdoors.
Easy-to-apply iron paint, since being slow-drying, it allows perfect brushing, it does not leave brush marks on the iron, especially suitable for home iron decoration.
 

 
 
HOW TO USE THE SYNTHETIC Zinc PHOSPHATE ENAMEL FOR FAST DRY IRON.

 

- The surfaces to be painted must be free of dust, grease and old paints; on new surfaces a first coat of primer is necessary.

- Homogenize the contents of the container by stirring thoroughly.

- The application can be done by brush, roller or air-less.

- The first hand will be applied by diluting 5-10% with our Industrial Synthetic Solvent.
 

 

SAFETY AND HYGIENE WHEN USING PAINT FOR DECORATIVE IRON OR SYNTHETIC Zinc PHOSPHATE DRYING Enamel FOR IRON

 

Perform good ventilation of the premises and have a good extraction system.
Use active carbon mask, safety glasses and protective gloves during application.

PRESENTATION OF THE ENAMEL Zinc PHOSPHATE FOR IRON IN GLOSSY OR SATIN

 

It comes in packages of 0.75 liters and 4 liters
 

 
 
BUY PAINT OR SYNTHETIC DECORATION ENAMEL Zinc PHOSPHATE FOR IRON, (SLOW DRYING ENAMEL) FOR INDOOR AND OUTDOOR) IN GLOSSY AND SATIN FINISH.

 
 
We guarantee the quality of our products in accordance with our general conditions of sale and supply.
Our technical advice for use, expressed verbally, in writing or through tests, is offered in accordance with our current knowledge and experience. They constitute simple indications, which do not compromise our responsibility, nor do they exempt you from the need to verify for yourself that the products supplied by us correspond to the procedures and objectives sought by you, carrying out your own controls and tests. The application and use of the products are beyond our control, and consequently, depend exclusively on your personal responsibility, and we cannot be held responsible for results other than those reflected here. Our safety recommendations do not prevent you from determining your own measures, adapted to the conditions of your facilities. We reserve the right to vary the data contained herein, without prior notice, according to technological evolution thereof.

  
 
If you want to know the PRICE OF THE DECORATIVE PAINT FOR IRON OF INTERIOR AND EXTERIOR, OR THE PRICE OF THE SYNTHETIC ENAMEL FOR IRON OF SLOW DRYING, you can consult it in the beginning of this page.