Painting Plastic color burgundy
PLASTIC PAINT COLOR BORDEAUX
Plastic paint for walls, roofs and facades in burgundy.
Buy plastic paint BORDEAUX color, very high decorative standard, silky finish, smooth, matte soft, high washability, excellent coverage and performance.
All colors between miscible and able to lower them with white.
ANTI RUST character.
BUY PLASTIC PAINT WALL COLOR BORDEAUX, WALL AND CEILING BOTH INSIDE AND OUTSIDE.
BUY PLASTIC DECORATIVE PAINTING, MONO COLOR COAT IN BORDEAUX
COMPOSITION OF PLASTIC DECORATIVE PAINTING, MONO LAYER IN COLORS (Painting BORDEAUX color)
Decorative painting, matte plastic exterior and interior emulsion based acrylic styrene.
Over 20,000 double rubs washability according to DIN 53778
CHARACTERISTICS OF PLASTIC PAINT DECORATIVE WALL, CEILING AND WALL IN COLOR (Painting BORDEAUX color)
Buy matte plastic paint for decorative finishes of the highest level, with great quality, especially suitable as paint for high decoration, silky finish, smooth, matte and smooth.
Plastic and decorative paint with maximum washability and excellent coverage and performance.
Monocpa tones painting, are intermixable with each other and can be lowered with white.
MONO CAPA plastic paint formulated with additives fungicides and bactericides avoiding the creation and spread of organisms mico has character ANTI RUST.
WHERE CAN I USE PLASTIC DECORATIVE PAINTING, MONO LAYER IN COLORS? (Painting BORDEAUX color)
Monkey Painting decorative layer, particularly suitable for painting walls and ceilings of your home, its easy brochabilidad, application and cleaning.
Plastic paint for protection and decoration of surfaces of plaster, concrete, plasterboard panels, precast concrete, masonry in general; horizontal and vertical surfaces.
Indicated plastic paint colors to paint walls, ceilings, facades, walls, etc ... both indoors and outdoors.
HOW DO I HAVE TO PAINT WITH DECORATIVE PAINTING PLASTIC ROOF AND WALL COLOR? (Painting BORDEAUX color)
NEW PAINT WALLS
If you want to give a first hand to use as a primer, dilute the paint with approx. 20% water.
For further games, painting with between 0% and 5% diluted water.
Give one or two hands to homogenize texture and desired coverage.
The masonry surfaces must be dry in order to allow moisture levels and alkalinity to decrease the maximum possible.
Sobro concrete or new cements will be expected to total set (approx 30 days)
PAINT AND PAINTED WALLS
If the surface is in good condition, remove dust and apply one or two coats of paint.
Diluting the paint is always recommended with approximately basito water per 5 kilos of paint
If the old surface is in poor condition should be removed loose and friable surfaces and proceed as in a new surface.
If the first painting is in the queue, tempera or lime must be removed or primed with a fixative background.
For the preservation of a paint sample for possible tweaks in the future, it should be kept in a closed pot (ie canning), without being diluted with water. (Dubo Remove paint before dilution)
The technical advice for the use and application of our products are given according to our best knowledge and information, the result of tests conducted in our laboratories and our experience gathered over the years customer service.
Paintings ANGAR, SC will not be responsible for problems caused by incorrect application of the products.
If you want to know the PLASTIC DECORATIVE PAINTING, MONOCAPA PRICE IN COLOR BORDEAUX, OR THE PRICE OF PLASTIC PAINT COLORS FOR INTERIOR AND EXTERIOR, you can consult it at the top of this page.
- Theoretical performance
- Between 5 and 8 square meters X Kilo X I Run (Depending on the support, if it is new or already it is painted)
- 2 hours
- Useful of Application
- BRUSH / ROLLER / AIRLESS
- Cleanliness Tool
- Dissolution of the first hand
- Between 10 % and 20 %
- Dissolution in the second hand
- Between 0 % and 10 %
- Higher than 20,000 double strokes according DIN 53778 STANDARD
- 1 KGS / 5 KGS / 23.5 KGS
- Time of dried to a temperature of 25 ºC and a relative dampness of 50 %
- To the tact 30 minutes
- Temperature of Application
- Between 5 and 35 centigrade degrees