Priming IRON EPOXI (High Solids)

IF YOU WANT TO KNOW MORE ABOUT THE PAINTINGS OF TWO COMPONENTS, WHAT IS IT? AND HOW TO USE IT? CLICK HERE TO READ OUR BLOG ARTICLE

NATURE OF THE INTERMEDIATE PRINTING OF BICOMPONENT EPOXY WITH HIGH SOLIDS

Two-component primer is a high solids paint, based on a
epoxy-polyamide system.

 

CHARACTERISTICS OF THE PRIMER FOR IRON, EPOXI 2C FOR INTERMEDIATE LAYERS WITH HIGH SOLIDS

 

- Epoxy Intermediate, due to its high content of antioxidant pigments, is a highly anti-corrosive and weather-resistant system, aggressive environments and chemical attacks.

- Provides high adhesion finishes, excellent hardness and very good coverage.
-Intermediate two component epoxy system with high anti-corrosive power, allows finishes on metal.

 



FIELDS OF APPLICATION

 

Specially formulated as an intermediate layer in finishes with systems
epoxy, polyurethane, etc ...

Indicated as the first protection layer on all types of metal supports
(even on difficult surfaces).

 

For painting a primer coat as the first layer or intermediate layer of

    Pipes, metal pipes.
    Bridges
    Containers
    Metal constructions in aggressive environments.
    Wastewater treatment plants, etc.
    Adhesion layer on galvanized, prior to the application of a coating based on epoxy resins.
    etc...


 

INSTRUCTIONS FOR PRINTING FOR INTERMEDIATE IRON OF EPOXI 2C

- The surfaces to be painted should be free of dust, grease and old paints.

- Mix the two components in a 5: 1 ratio and homogenize the contents of the container, stirring thoroughly.

- The application can be done by brush, roller or air-less.

- The first hand will be applied by diluting 10-15% with our Epoxy Solvent; For subsequent hands the dilution will be 5% or use. Painted with
air-less will be done diluting 25%.

 

 

PRECAUTIONS WHEN USING THE PRINTING FOR INTERMEDIATE IRON OF EPOXI 2C

Perform good ventilation of the premises and have a good extraction system.

Use active carbon mask, safety glasses and protective gloves during application.

 


PRESENTATION OF THE PRIMER FOR INTERMEDIATE IRON OF EPOXI 2C

 

It comes in packages of:

Component A: 5 kilos and 20 kilos
Component B: 1 kilo and 4 kilos

 
 

BUY EPOXY PRINTING OF TWO COMPONENTS FOR IRON FOR INTERMEDIATE LAYERS WITH HIGH SOLIDS
We guarantee the quality of our products in accordance with our general conditions of sale and supply.

We guarantee the quality of our products in accordance with our General Terms and Conditions of Sale and Delivery.
Our advice on application technologies, whether verbal, written or through testing, is based on our current level of knowledge and experience. These are simple instructions that do not affect our responsibility and do not exempt you from the need to check for yourself whether the products we supply comply with the procedures and objectives you seek, carrying out your own controls and tests. The application and use of the products is beyond our control and is therefore solely your personal responsibility. We cannot be held responsible for results other than those presented here. Our security recommendations do not prevent you from defining your own measures, adapted to the conditions of your systems. We reserve the right to change the data contained herein without prior notice based on technological advances.

If you want to know the PRICE OF THE PRINTING FOR EPOXY IRON OF TWO COMPONENTS, FOR INTERMEDIATE LAYERS OF HIGH SOLIDS, you can consult it at the beginning of this page.