Nogalina FLAKE (wood stain)
Nogalina DYE FLAKE
easy to prepare dye, it used to stain all the raw wood.
The nogalina comes in flakes, which melt in warm water.
They can get the color from walnut, through the media, according to the dark walnut hue requerida- all transparent.
About the cast does an aged effect.
BUY Nogalina FLAKE TO DYE OR RESTORE WOOD FURNITURE.
BUY WALNUT EXTRACT to color the wood unvarnished and porous materials.
Nogalina flake, wood stains
The nogalina flake tint is a very easy to prepare, it is used to match and tinted, walnut color, all kinds of raw wood.
The nogalina comes in flakes, which melt in water up to get different shades of walnut color, since the light walnut, through the media, according to the requerida- dark walnut color.
Its application is simple and is done with a brush or sponge, taking care and attention so that the tinted stay in top condition
As the wood preservative, dyes also exist in different shades, all solution with water, as chemical dyes or natural organic solvent system and used with tinted clearcoat, are highly toxic.
With these anelinas water can be prepared whole range of colors, completely transparent to tone wood, respecting all its veins and its naturalness.
Walnut Extract for staining wood
ASPECT OF Nogalina FLAKE
Its purpose is to dye wood and similar materials.
The tone achieved with Walnut extract is not as intense as bitumen, is rather a walnut tone, this key also depend on how much concentrate is walnut extract once dissolved.
The nogalina Flake, also used in polycromía.
The nogalina flake is extracted from the two outer layers of the fruit of the -epicarpo and mesocarpo- nut. Green walnut shell changes consistency and color when ripe walnut. It turns a dark color. It is at this stage that we can extract the walnut stain.
DIRECTIONS FOR WOOD OR DYE FLAKE OR DUST Nogalina
For walnut extract solution or warm water almost boiled recommended, it is also possible with cold water, but this way of dissolution will become slower than before.
You can also use alcohol to dissolve the product.
The color depends on the amount of extract of walnut used. If necessary decrease or intensify the color, it is sufficient to vary only the amount of scale dissolved.
RECOMMENDATIONS FOR USING THE DYE FLAKE Nogalina
Its application to the timber can be by brush, roller or huaipe or dip.
It expects to wait that the surface is completely dry before applying sealer and lacquer wood.
- 24 hours
- Theoretical performance
- Between 12 and 15 square meters Kilo X X Hand (Depending on the media, it is new or already painted)
- Useful of Application
- BRUSH / ROLLER
- Cleanliness Tool
- Time of dried to a temperature of 25 ºC and a relative dampness of 50 %
- To the tact 15 minutes
Me fue muy útil para teñir una madera en el techo de mi casa con una muy fácil técnica de aplicación.