Painting WATERPROOF White Facades
ACRYLIC PAINT WITH POLYURETHANE ON WHITE
Available in 4/10/15 liters.
Very suitable for waterproofing and protection of vertical walls.
Waterproofing facades and walls
Coating based on polyurethane acrylic copolymers, which provides WATERPROOF films, with great resistance to weathering and great adhesion.
BUY PAINTING TO WATERPROOF WALLS AND FACADES IN WHITE COLOR
COMPOSITION OF WATERPROOF PAINT FOR FAÇADES
Antiblocking coating based on emulsion acrylic resins modified with aliphatic polyurethane.
Washability greater than 5,000 double passes according to UNE 48 284
ADVANTAGES OF WATERPROOF PAINTING FOR FACADES
Acrylic Polyurethane paint provides long lasting films and excellent adhesion.
The coatings formed have good impermeability, are resistant to heat and permeable to water vapor.
It has a wide range of colors that provide very decorative films, as well as protective films.
WHERE TO USE WATERPROOF PAINT FOR EXTERIOR WALLS
This waterproof paint is recommended for protecting new facades, industrial buildings, warehouses, etc.
It is also very suitable for the rehabilitation of old facades, after preparation of the support, and for the waterproofing of vertical walls.
This product is very suitable for the protection and decoration of prefabricated ships, whether panels, trusses or columns, allowing a direct application after the decoupling, without prior preparation.
It provides these supports with strength and durability, both outdoors and indoors.
HOW TO USE WATERPROOF PAINTING ON EXTERIOR WALLS
-The surface to be painted must be free of dust, grease and old paint; For this purpose it is advisable to scrape or prepare the support with a sealant varnish.
-Homogenize the contents of the container by thoroughly stirring.
-The application can be done with brush, roller or air-less.
-The first hand will be applied by diluting 10-20% water; For the second hand can be diluted up to 10% or applied to use.
Do not apply below 5 ° C.
The technical advices for the use and use of our products are given according to our best knowledge and information, fruit of the tests carried out in our laboratories and our experience collected over the years at the customer's service.
Paintings ANGAR, SC will not be responsible for the problems caused by incorrect application of the products
If you want to know the price of waterproof paint for facades in white, you can see it at the top of this page.
- 3 - 4 HORAS
- Theoretical performance
- 10 - 12 m2 x litro x mano
- Useful of Application
- Brocha / Rodillo / Airless
- Cleanliness Tool
- Dissolution of the first hand
- Between 10 % and 20 %
- Dissolution in the second hand
- Between 0 % and 10 %
- 4 litros / 10 litros / 15 litros
- Humedad del soporte
- Inferior al 10 %
Un producto genial, perfecto, gracias a este producto pudimos impermeabilizar y proteger nuestras paredes de la fachada facilmente. Se aplica como una pintura normal. Recomendable el producto.