Acrylic soils SATINATED with solvent
ACRYLIC PAINT FOR SOILS SATINED TO SOLVENT.
Painting for indoor and outdoor floors
Especially indicated for protection and decoration of floors of garages, warehouses, storage rooms, warehouses, etc.
The colors are intermixable
High quality paint of a component for the floor. Can be moved for vehicles
Product customizationDon't forget to save your customization to be able to add to cart
IF YOU WANT TO KNOW MORE, ABOUT THE PAINT TO USE ON THE FLOOR OF A RECREATION, OR SEE MODELS OF GAMES TO PAINT, CLICK HERE AND READ THIS ARTICLE OF OUR BLOG!
BUY PAINT FOR INDOOR AND EXTERIOR FLOORS OF A COMPONENT, ACRYLIC PAINT TO SOLVENT
COMPOSITION OF PAINTING ACRYLIC SOILS TO SOLVENT
Painting based on solvent-based thermoplastic acrylic resin, for application on cement floors, asphalt, etc. of air drying.
YELLOW RAL 1023
GREEN RAL 6002
RED RAL 3009
RED RAL 3020 SIGNALING
GRAY RAL 7040
PAINT FEATURES ACRYLIC SOILS TO SOLVENT
- High coverage
- High performance
- Great adhesion
- Tensile strength
- Resistance to alkalinity
- Abrasion resistance
- Perfect combination between elasticity and hardness.
WHERE CAN I APPLY ACRYLIC SOLID PAINT TO SOLVENT?
Due to its properties, this coating is ideal for painting and decorating floors and road signs, both in interior and exterior floors.
Paint passable for vehicles and people, with great resistance to mechanical and chemical traction.
You can use this economical floor paint, in any floor of garages, warehouses, garages, storage rooms, porches, play courts, warehouses, stores, stores, and any floor both indoor and outdoor.
HOW SHOULD I APPLY ACRYLIC SOLID PAINT TO SOLVENT?
The surface to be painted must be free of dust, grease, old paint and completely dry.
Homogenize the content of the container stirring thoroughly.
If the soil is not very porous, it will be necessary to carry out a chemical or mechanical treatment to open the pore and achieve a better adherence.
On concrete or new cements will have to wait for its total setting, approximately 30 days.
The application can be done with brush, roller or air-less.
The first coat will be applied, diluting 20-25% with fast-drying industrial solvent; for the second hand the dilution will be 10%.
Do not apply below 5ºC
PRECAUTIONS WHEN USING ACRYLIC PAINTS TO SOLVENT
Perform good ventilation of the premises and have a good extraction system.
Use active carbon mask, safety glasses and protective gloves during application.
PRESENTATION ACRYLIC PAINT TO SOLVENT
It comes in packages of 4.5 kilos and 23 kilos.
The technical advice for the use and use of our products is based on our best knowledge and information, as a result of the tests carried out in our laboratories and our experience collected over the years at the customer's service.
Pinturas ANGAR, SC will not be responsible for the problems caused by incorrect application of the products.
If you want to know the PRICE OF PAINT FOR SOILS OF INTERIOR AND EXTERIOR ACRYLIC TO SOLVENT, you can consult it at the beginning of the page.
- 6 Horas
- Theoretical performance
- 10 - 12 m2 X KILO X MANO
- Satinado / Antideslizante
- Disolvente Industrial de secado rápido ( Para aplicar a pistola, habrá que utilizar un disolvente retardante)
- Useful of Application
- Brocha / Rodillo / Airless
- Cleanliness Tool
- Industrial Dried Rapid Solvent
- Dissolution of the first hand
- Entre un 20 % y 25%
- Dissolution in the second hand
- Between 0 % and 10 %
- VERDE / NEGRO / AMARILLO / GRIS SUELOS / BLANCO / ROJO ÓXIDO / CARTA RAL
- Time of dried to a temperature of 25 ºC and a relative dampness of 50 %
- Al tacto : 60 Minutos
- Temperature of Application
- No aplicar por debajo de 5ºC
- Humedad del soporte
- Inferior al 10 %