What is vinyl enamel

  

It is a one-component ultra-fast drying enamel and thanks to its chemical composition it has great resistance. Therefore, this product is used to finish paint jobs, especially metal and outdoors.

 

It is applied on metal structures and is capable of withstanding cold, hot or humid environments. It is also used for a protective purpose, but also decorative. It resists blows very well, as well as environmental conditions.

 

 

CLICK HERE IF YOU WANT TO BUY VINYL PAINT


It also has excellent color retention and flexibility.

 

For all these reasons, you can use it with all the guarantees in the following cases:

 

Machinery protection.

Enameled pipes.

Truss coating.

All kinds of metallic structures.

In industrial and agricultural machinery.

In the manufacture of surfboards.

chemical environments.

 

Thus, vinyl iron enamel is used for a large number of surfaces, which also include bars, transformers, etc. The best results are obtained in industrial infrastructures of large cities or any other place outdoors.

 

 

How is this product used?

 

A product may have optimal properties, but it is essential to use it properly to obtain the best result.

 

There are a series of steps that you should follow to avoid errors, stains or less conspicuousness. We tell you what they are:

 

Prepare the surface where you are going to apply it

 

Remove any traces of dirt, rust, moisture, other paint, grease or oil. This way, you can get the job done much faster. In addition, the result will be much more attractive and of higher quality.

 

Carrying out this phase well can make the rest of the work easier for you, both in terms of optimizing time and good results. In some cases, there may be a poorly adhered or oxidized layer of old paint. If so, you will have to sand the surface well until it is completely removed.

 

Prepare the enamel well, Dilution

 

First you have to homogenize the product and then add the industrial synthetic solvent for its application. Also use it to wash materials that have been stained. To know the recommended dilution you can enter our technical sheet.

 

Shake it up and mix it up, you can use a low speed mixer or do it by hand. The color should be uniform.

 

Application

 

You can use brushes, rollers and airless methods (such as spray guns or graffiti), it is a very suitable paint for immersion painting. The ideal temperature conditions for maximum product performance are 25 ºC. Regarding drying, our product dries after 15 minutes to the touch.

 

Do not apply new coats before five hours, either, to allow for good drying. Apply at least two coats. In the last layer we recommend that you let it dry for an hour before handling it, to avoid scratches due to poor drying.

 

 

 

 

What advantages does this ultra-fast drying nail polish have?

 

As we have indicated, this product has numerous advantages that make it ideal for a large number of painting projects.

 

Above all, it is usually used in large-scale jobs, on surfaces that sometimes present some difficulty for painting. In those cases it is optimal. Among the benefits offered by its use are the following:

 

Very simple application.

Magnificent finish and coverage.

Hands can be given both with a brush and with a roller or spray gun.

It levels very well, so it does not leave traces. (If applied with a brush or roller, it can leave marks due to its ultra-fast drying)

Colors can be mixed.

Its drying is practically immediate.

It has great mechanical resistance.

It is resistant to rain, humidity or heat.

It is suitable for environments known as high chemical aggressiveness.

 

 

What precautions should you take when using it?

 

Although this product works great in most cases, there are also some precautions to take. These are the most important:

 

It is important that the rain does not fall on the work, at least six hours after the last coat.

 

As you can see, this type of enamel for vinyl paints is ideal for the metal sector. Therefore, it is used with great results in construction, industry or maintenance. It is suitable for both indoors and outdoors.

 

 

 

CLICK HERE IF YOU WANT TO BUY VINYL PAINT

Comments (0)

No comments at this moment

New comment

You are replying to a comment

Portes Gratis Angar para pedido + 75 €