Sand-colored plastic paint
Grid included large bucket
Plastic paint for interior walls and ceilings and exterior facades in sand color
Buy plastic paint in ARENA, with great professional quality for high decoration, with a silky, smooth, matte and soft finish, maximum washability, excellent coverage and performance.
All colors between mixable and suitable for reducing them with white.
ANTI MOLD character.
BUY PLASTIC PAINTING IN SAND COLOR FOR WALLS, FAÇADES AND CEILINGS BOTH INSIDE AND OUTSIDE.
BUY SINGLE LAYER DECORATIVE PLASTIC PAINT IN COLOR
COMPOSITION OF THE DECORATIVE PLASTIC PAINT, SINGLE LAYER IN COLORS (SAND color paint)
Decorative paint, matte plastic for exterior and interior based on acrylic styrene emulsion.
Washability greater than 20,000 double passes according to DIN 53778 standard
CHARACTERISTICS OF DECORATIVE PLASTIC PAINTING FOR WALLS, CEILINGS AND FAÇADES IN COLOR (SAND color paint)
Matte plastic paint to obtain finishes of the highest decorative level, with great quality, especially indicated as paint for high decoration, with a silky, smooth, matte and soft finish.
Buy Plastic and decorative paint with maximum washability, as well as excellent coverage and performance.
The tones of the monocoque paint are intermixable with each other, and can be lowered with white.
MONOCAPA plastic paint, formulated with fungicidal and bactericidal additives avoiding the creation and propagation of microorganisms, it has an ANTI-MOLD character.
WHERE CAN I USE THE DECORATIVE PLASTIC PAINT, SINGLE LAYER IN COLORS? (SAND color paint)
Single-layer decorative paint, especially suitable for painting walls and ceilings in your home, due to its easy brushability, application and cleaning.
Plastic paint, for the protection and decoration of plaster surfaces, cement, plasterboard panels, prefabricated concrete, masonry in general; in horizontal and vertical walls.
Plastic paint in colors indicated for painting walls, ceilings, facades, walls, etc... both indoors and outdoors.
HOW DO I HAVE TO PAINT WITH DECORATIVE PLASTIC PAINT, FOR CEILING AND WALL, ONE LAYER IN COLORS? (SAND color paint)
PAINT NEW WALLS
If you want to give a first coat to use as a primer, dilute the paint with approx. 20% water.
For the following coats, the paint will be diluted with between 0% and 5% water.
Give one or two coats to homogenize texture and desired coverage.
Masonry surfaces must be very dry in order to allow humidity and alkalinity levels to decrease as much as possible.
On concrete or new cements, it will be necessary to wait for its total setting (30 days approx)
PAINT ALREADY PAINTED WALLS
If the surface to be painted is in good condition, remove the dust and apply one or two coats of paint.
It is always recommended to dilute the paint with approximately one glass of water, for every 5 kilos of paint.
If the old surface is in poor condition, loose and poorly adhered surfaces should be removed and proceed as on a new surface.
If the first paint is glue, tempera, or lime, it must be removed or primed with a fixing primer.
For the preservation of a paint sample for possible touch-ups in the future, it should be kept in a closed container (for example, canned), without having been diluted with water. (Remove from the paint tube, before its dilution)
We guarantee the quality of our products in accordance with our general conditions of sale and supply.
The technical advice for the use and use of our products is given to the best of our knowledge and information, the result of tests carried out in our laboratories and our experience gained over the years in customer service.
If you want to know the PRICE OF DECORATIVE PLASTIC PAINTING, MONOCAPA IN SAND COLOR, OR THE PRICE OF COLORED PLASTIC PAINTING FOR INTERIOR AND EXTERIOR, you can consult it at the beginning of this page.
- Theoretical performance
- Between 5 and 8 square meters X Kilo X I Run (Depending on the support, if it is new or already it is painted)
- 2 hours
- Useful of Application
- BRUSH / ROLLER / AIRLESS
- Cleanliness Tool
- Dissolution of the first hand
- Between 10 % and 20 %
- Dissolution in the second hand
- Between 0 % and 10 %
- Higher than 20,000 double strokes according DIN 53778 STANDARD
- 1 KGS / 5 KGS / 23.5 KGS
- Time of dried to a temperature of 25 ºC and a relative dampness of 50 %
- To the tact 30 minutes
- Temperature of Application
- Between 5 and 35 centigrade degrees