- -25%
Pliolite Waterproof Coating
€54.64
€72.85
-25%
Tax included
PLYOLITE LINING
Waterproof, resistant to the penetration of rain, transpires moisture from the wall.
Paint for facades resistant to weather conditions, both at low and high temperatures.
Self-cleaning and extremely durable coating.
Paint for the protection of facades and quality Anti-Mould.
By purchasing this product, you will accumulate 20 points with our loyalty program. You can convert 20 points in your account into a coupon for a future purchase.
DESCRIPTION OF THE PLIOLITE COATING
Coating based on solvent-based Pliolite resins for facades. It can be applied on facades that have humidity, since this product, due to its excellent adhesion, allows humidity to filter from the wall.
Pliolite facade paint has great resistance to adverse climates, that is, it protects the facade from external weather agents.
In addition to U.V. from the sun, so it is very suitable for exterior facades, but also for painting interior walls.
The Pliolite coating allows to protect the façade from mold growth.
PROPERTIES OF PLIOLITE FACADE PAINT
Finish: Silky Matte
Density: 1.40-1.50 grs/cm3 (slight variations depending on the color)
Theoretical yield: 8-10 m2/liter
Repainting: 3-4 hours
Diluent: Synthetic Solvent
Colors: White and our Coatings menu
TECHNICAL CHARACTERISTICS OF THE PLIOLITE COATING
- The Pliolite Coating is waterproof, therefore it resists the penetration of rainwater. Due to its microporous nature and excellent adhesion, it allows moisture trapped in the wall to exude, without suffering blistering or chipping.
- Provides films resistant to UV rays. from the sun, self-cleaning and extremely durable, maintaining its initial appearance for many years.
- The formation of the film is not affected by weather conditions. The application is possible both in low-temperature environments and on high-temperature walls. Nighttime frosts, after application, also do not affect the performance of the paint, as do sudden showers, even a few minutes after application.
- This coating is easy to apply and requires only minimal surface preparation, removing loose materials if necessary.
- Leaves very decorative finishes, having a wide range of colors. Also available in Anti-Mould quality.
FIELDS OF APPLICATION OF PLIOLITE WATERPROOF FACADE PAINT
Pliolite Coating can be applied on any type of support. It is especially indicated for the protection and decoration of all types of facades, both indoors and outdoors.
INSTRUCTIONS FOR USE OF THE PLIOLITE COATING
- The surface to be painted must be free of dust, grease and old paint chips.
- Homogenize the contents of the container by stirring thoroughly.
- It can be applied by brush, roller or air-less.
- The application can be done as it comes in the container or by diluting 5% with our Synthetic Solvent.
- Do not apply below 5°C.
STORAGE OF PAINT FOR PLIOLITE FACADES
The product must be stored in the original container perfectly closed and in places protected from the sun and excessive cold. We recommend temperatures between 5 and 35ºC.
SAFETY AND HYGIENE OF THE PLIOLITE COATING
Make a good ventilation of the premises and have a good extraction system. Wear safety glasses and protective gloves during application.
The use of a mask is advisable. For more information consult the Safety Data Sheet corresponding to the product.
PRESENTATION OF PLIOLITE FACADE PAINT
It comes in 4-litre, 10-litre and 16-litre containers.
We guarantee the quality of our products in accordance with our general conditions of sale and supply.
Our technical advice for use, expressed verbally, in writing or through tests, is offered in accordance with our current knowledge and experience. They constitute simple indications, which do not compromise our responsibility, nor do they exempt you from the need to verify for yourself that the products supplied by us correspond to the procedures and objectives sought by you, carrying out your own controls and tests. The application and use of the products are beyond our control, and consequently, depend exclusively on your personal responsibility, and we cannot be held responsible for results other than those reflected here. Our safety recommendations do not prevent you from determining your own measures, adapted to the conditions of your facilities. We reserve the right to vary the data contained herein, without prior notice, according to technological evolution thereof.
- Theoretical performance
- Between 8 and 10 square meters per Kilo and Hand (Depending on the media, whether it is new or already painted)
- Repainted
- Between 3 and 4 hours
- FINISH
- Dull
- Solvent
- RS solvent deodorized
- Useful of Application
- BRUSH / ROLLER / AIRLESS
- Dissolution of the first hand
- Color
- Transparent or colorless
- Density
R04
1000 Items
Reviews (1)
Pintar pared con humedad
Puntuación total:
Excelente producto, no sabíamos que hacer ya con la humedad de la pared y esta pintura nos ha permitido pintar las humedades de la pared.
Me parece muy bien también que puedas elegir tan variedad de colores para un producto especial