Malva Plastic Intermediate

BUY COLOR PLASTIC PAINT FOR INTERIOR AND EXTERIOR WALLS. Single layer

 
NATURE OF PAINTING FOR INTERIOR AND EXTERIOR


Exterior and interior matte plastic paint based on acrylic styrene emulsion.
Washability greater than 20,000 double passes according to DIN 53778
 
TECHNICAL DATA OF PLASTIC PAINT FOR WALLS AND FACADES

    Matte finish
    Theoretical performance: 5-8 m2 / layer
    Repainting: 2 hours
    Dry to touch: 30´
    Application tools: Brush, roller or air-less
    Useful cleaning: Water
    Application temperature between 5 and 35ºC
    1st coat dilution: 10-20% water
    2nd coat dilution: 0-10% water

 


CHARACTERISTICS OF PLASTIC PAINT FOR INTERIOR AND EXTERIOR

Matte plastic paint to obtain highly decorative finishes, great quality for high decoration, with a silky finish, smooth matte and soft, maximum washability, as well as excellent coverage and performance.
The shades are intermixable with each other, and can be lowered with white.
Formulated with fungicidal and bactericidal additives avoiding the creation and spread of mycoorganisms, it is ANTI-MOLD.

 

FIELDS OF APPLICATION OF WATER-BASED PLASTIC PAINT

 
For the protection and decoration of surfaces of plaster, cement, plasterboard panels, precast concrete, masonry in general; in horizontal and vertical surfaces.
 
HOW TO USE THE PAINTING FOR WALLS AND FACADES

 
NEW SURFACES
If you want to give a first coat to use as a primer, dilute the paint with approx. 20% water. Give one or two coats to homogenize the desired texture and coverage.
Masonry surfaces must be well dry in order to allow humidity and alkalinity levels to decrease as much as possible.
On concrete or new cements it will be necessary to wait for its total setting (30 days approx)
 
PAINTED SURFACES
If the surface to be painted is in good condition, remove dust and apply one or two coats of paint.
If the old surface is in poor condition, loose and poorly adhered surfaces should be removed and proceed as on a new surface.
If the first paint is glue, temper, or lime, it must be removed or primed with a fixing primer.

 

 
The technical advice for the use and use of our products is given according to our best knowledge and information, the result of tests carried out in our laboratories and our experience gathered over the years at the customer's service.
Pinturas ANGAR, S.C. will not be responsible for the problems caused by an incorrect application of the products


BUY CHEAP INTERIOR AND EXTERIOR PLASTIC PAINT AND OF EXCELLENT QUALITY. WE ARE MANUFACTURERS OF PAINT. PROFESSIONAL QUALITY AT FACTORY PRICES