WHAT COLORS CAN I GET WITH WATER-BASED OR SOLVENT-BASED DYES?

Keep in mind that if we make ourselves our painting colors with paint or coloring dyes will have to be light colors and pastels can not be too dark or bright, because the base with which you do it is with white base that is PLASTIC PAINT WHITE , unless we buy plastic paint BASE NEUTRAL or transparent.

If we PAINT COLOR DARK or non cakes, we recommend buying ready-made, MADE DIRECTLY WITH THE RIGHT BASE for each color, which the covering will be much higher

BASIC MIXED DYE TO TARGET A COLOR

How to make different colors of acrylic paint:

Red Dye dye + Yellow = Orange

Tint Tint Blue + Red = Purple

Tint Tint Blue + Yellow = Green

Dye Red Dye + White = Pink

Ocher tint + few drops of yellow dye = Ivory

Tint Tint Blue + Black = Dark Blue

Blue tint on the white paint = Light Blue

Yellow tint on the clear white = yellow paint

Brown stain on the white paint = Marron

Red dye on white paint = rose or light red, depending on the amount of dye to let

Green on white paint = Green Light

IF WE WANT TO COLOR TONE CREAM:

Always cast ocher and then add a few drops of red, or yellow or orange, depending on the tone cream color you want to achieve.

TIPS TO MAKE WITH COLOR DYES:

When we prepare to make a flush, you must first be clear about the color you want to achieve, either in a sample or in our head.

We should also bear in calculating the painting we will need to not spend more than necessary or to not fall short.

You better not miss on that, if missing would be a problem, because to do exactly the same color using the same quantity of dyes before, is quite difficult (almost impossible), so better about not missing.

Once we have calculated the paint that we use, we mix it with the amount of water needed to dilute and we can start doing color.

To make the colors will slowly, casting paints very slowly. Suppose you want a clarito purple or mauve, dyes for this color would be red and blue, then you'd start to get a little red and a little blue and removerías great painting, you want it darker then made more, you want him throwing red as made redder, the important thing is that the billboards little by little, because once you have you been throwing dyes there is no turning back, so you see throwing dyes gradually, stirring well all paint until you find the color you want. (Siempres can add a little more white to lighten it, but I have some left over paint)

Another tip is that if we made a color that takes a large amount of dye, we remove every so often the color, because the dyes are posasn at the bottom of the painting, and if we are not removing as we begin to paint, at first will be color and end another, so when you bear much stain removing it is advisable to cash them as we go painting.

Equally if not give us time to finish painting on the same day and we have to continue the next day, when we go to pick the color to paint again, we will remove perfectly because the dyes have been in the background.

If we remember that colors like bright red or orange, a black or a very dark color can not do with dyes, those colors we all have to do in the paint store.(You can go to our plastic paint color section.) Or buying a plastic paint in neutral or transparent base.

.

HOW CAN I MAKE AN INTENSE COLOR WITH WATER-BASED DYES?

When we add dyes to water to white paint to make a color, we can only get light or pastel tones, since no matter how much dye you add to white, you will never be able to get a dark tone. 

WE HAVE THE SOLUTION TO MAKE DARK COLORS WITH DYES. We have manufactured a transparent paint, which will not gray out or lower the tone. On a transparent base like this paint, by adding dyes, you can achieve dark or intense tones, such as black, red, etc...

HOW CAN I MAKE A COLOR WITH SOLVENT DYES?

Solvent dyes are recommended for dyeing solvent-based paints, both interior and exterior in all colors.

Pigment concentrates based on non-reactive resins, with excellent compatibility with most solvent-based industrial paints. They are incorporated into paints by stirring and allow several thousand different colors to be obtained.

All colors are mixable with each other , obtaining an infinite range of colors.

Solid and sharp colors.

Very high concentration.

Clean and intense tones

Great compatibility with most paints and varnishes on the market.

WHERE CAN I USE SOLVENT DYES OR DYES?

Indicated for coloring all types of solvent-based paints

If the base of the paint is white, you can achieve a maximum of pastel tones. If you want to achieve stronger tones you should use a transparent paint, or a colorless base.

Very useful products for Industry, signage, automotive, household goods, bodywork, etc.

They make it easier to prepare a wide variety of colors, mainly when the quantities to be prepared are small. They are incorporated into paints by stirring.

Very useful for reducing costs, for the speed in obtaining different colors and for allowing only the desired amount of color to be manufactured.

HOW TO USE SOLVENT DYES?

We will add the dye or colorant to the solvent, to the white or colored paint. We will not exceed more than 15% of the total paint, since if we exceed this limit, we may have problems with bursts, flocculations, etc...

Due to the great diversity of resins and raw materials in the products on the market, if solvents are not added to our products, it is always preferable to do a small compatibility test within the dyes and paint.

CLICK HERE TO ACCESS OUR CATEGORY AND BUY WATER dyes or colorants

.

CLICK HERE TO ACCESS OUR CATEGORY AND BUY SOLVENT DYES OR DYES

CLICK HERE TO BUY PLASTIC PAINT TRANSPARENT intense colors

.

CLICK HERE TO ACCESS OUR CATEGORY AND BUY PAINT WHITE PLASTIC

.

CLICK HERE TO ACCESS OUR CATEGORY AND BUY PLASTIC PAINT IN COLORS

.

We can only remind you that in our shop you will get all these colors, MADE DIRECTLY WITH THE RIGHT BASE for each color, which the covering will be much higher, but we give these tips if you prefer to unleash your creativity.

.

.