Anti-Striped varnish (Polyurethane 2C)
Polyurethane varnish ANTI-SCRATCH 2 C
Varnish to protect from scratches and damage mounts with heavy traffic or harsh environments.
Scratch-resistant paint for walls, facades, elevators, floors, walls, trains, subways ...
Recommended for metal, wood and concrete surfaces.
Varnish anti-rrayado for walls and floors in matte or gloss finish
IF YOU HAVE DOUBTS ON PAINT MUST APPLY, CLICK HERE, PLEASE NOTE THE PAINT MORE SUITABLE FOR EVERY SITUATION .
Buy Polyurethane varnish, scratch-resistant and Antigraffiti for interior and exterior wood, iron and concrete, to protect from scratches and graffiti support
VARNISH COMPOSITION two component polyurethane ANTI STRIPES
Two colorless varnish components poliuretnao nature acrylic solvent based.
FEATURES AND BENEFITS TO PREVENT PAINT STRIPES
- Polyurethane Varnish 2 / comp. It provides finishes with very good adhesion, in addition to high hardness and flexibility, weather resistance and a very good stability to ultraviolet light.
- It gives the holder finished with excellent resistance to abrasion and chemicals, and very decorative.
- The anti-scratch and anti-graffiti coating, provides protection to the support, painted and scratched elevators, walls, irons, sheets, walls, etc ...
WHERE CAN I USE polyurethane varnish ANTI STRIPED TWO COMPONENTS
Recommended for protection against graffiti and graffiti on walls, trains, walls, banking facilities, subways, department stores, markets varnish.
Coating to prevent scratching of floors, facades, elevators, etc ...
Recommended for the protection and decoration of all metal surfaces, concrete, wood, etc .. both indoors and outdoors.
HOW SHOULD YOU USE TWO COMPONENT POLYURETHANE VARNISH scratch-resistant?
- The surfaces must be free of dust, grease and old paint.
- Mix the two components in proportion 4: 1 and homogenize the contents are thoroughly stirring.
- Application can be by brush, roller or airless.
- The first coat is applied by diluting 25% with our Polyurethane Solvent; for subsequent hands diluted approximately 10%.
- To achieve good adhesion between coats must not let pass more than 24 hours.
PRECAUTIONS WHEN USING TWO-COMPONENT VARNISH POLYURETHANE
Make a good ventilation in the room and have a good extraction system.
Use activated carbon mask, goggles and gloves during application.
PRESENTATION 2C polyurethane varnish ANTI SCRATCH
It is available in packs of:
Component A: 4 kilos and 16 kilos.
Component B: 1 kilo and 4 kilos.
Technical advice for the use and application of our products are given with best knowledge and information, the result of tests conducted in our laboratories and our experience gained over the years customer service.
ANGAR paintings, SC will not be responsible for problems caused by incorrect application or misuse of our products.
IF YOU WANT TO KNOW THE VARNISH TWO COMPONENTS OR TWO COMPONENT POLYURETHANE ANTI-SCRATCH PRICE (varnish to protect walls, fences, iron, wood, striped, painted or graffiti), you can consult the top of this page.
- Theoretical performance
- Between 10 and 12 square meters Kilo X X Hand (Depending on the media, it is new or already painted)
- After 8 hours at least
- Brightness / Mate
- Disolvente Poliuretano
- Cleanliness Tool
- Solvent Polyurethane
- Transparent or colorless
- Proportion of the mixture
- 4: 1 (4 parts of polyurethane catalyst x 1)
- Useful life of the mixture
- 6 hours at 20 degrees Celsius
- 0.90 - 1.00 grs / cm3
- Humedad del soporte
- Inferior al 10 %