SILICATE Mineral Glaze
ECOLOGICAL SILICATE MINERAL SAVINGS (Breathable)
Glaze based on Potassium Silicate resins that provides films with good resistance to friction and with a pleasant decorative effect.
Non-film forming paint, leaves a layer permeable to water vapor
DOES NOT FALL WITH MOISTURE , does not leave bubbles and is highly resistant to light and aggressive environments
Compatible with relatively recent renderings
Great stability even under humid conditions
- Resistant to atmospheric agents and aggressive environments.
- Excellent resistance to light.
- It can be dyed with waterborne dispersions of inorganic pigments.
- Highly stable colors.
- Easy to apply.
TRANSPARENT COLOR / SOFT COLORS OR TAILOR-MADE PASTEL from NCS CHART or ROOM SIMULATOR
Product customizationDon't forget to save your customization to be able to add to cart
Silicate paint ORDER TO APPLY IN WALLS WITH MOISTURE buy silicate coating, silicate mineral BUY PAINT
COMPOSITION OF SILICATE WHITE PAINT
Inorganic mineral coating structure biocidal effect, formulated with potassium silicate.
CHARACTERISTICS OF SILICATE PAINT IN WHITE
Silicate Paint is not film, leaves a layer permeble water vapor and does not deteriorate the effect of atmospheric agents. (Ni it falls or rises with moisture), it is highly resistant to light and aggressive environments.
This painting marked by three very important properties: It supports relatively recent plaster that continue an active alkalinity, has good thermal insulation properties of the wall and high stability even under humid conditions of the support.
It is a fireproof paint, easy to use and totally ecological, since it contains no solvents.
Highly recommended for the protection and rehabilitation of all types of building walls, particularly suitable for l LACES where there is continuous moisture such as caves houses, churches, warehouses, etc ..
FIELDS OF APPLICATION FOR SILICATE PAINT
- New or old plaster of cement, sand and lime.
- Mortars (indoor) new or old sand and lime.
- Concrete surfaces.
- Brick walls (unglazed).
- Fiber cement boards.
- Plaster surfaces (pretreated)
- Metal surfaces (especially aluminum and galvanized steel)
- Walls of natural or artificial stone (porous).
- Painting in oil, plastic paints.
DIRECTIONS SILICATE PAINT
-The Surface must be EXEMPT dust, grease and old paint; it is therefore desirable to carry out a scraping and surface preparation our impregnation Silicate, particularly porous superificies.
-Homogeneizar Removing the container contents thoroughly.
-The Application can be done by brush, roller or airless equipment.
Do not apply below 5 ° C.
HEALTH AND SAFETY, PRECAUTIONS SILICATE PAINT
No special precautions regarding toxicity. Not polluting or contain solvents.
Technical advice for the use and application of our products are given with best knowledge and information, the result of tests conducted in our laboratories and our experience gained over the years customer service.
ANGAR paintings, SC will not be responsible for problems caused by incorrect application of the products.
- Between 3 and 4 hours
- Theoretical performance
- Between 9 and 12 square meters per Kilo and layer (Depending on the media, whether it is new or already painted)
- Mineral matt
- Imprimación Silicato
- Useful of Application
- BRUSH / ROLLER / AIRLESS
- Cleanliness Tool
- Dissolution of the first hand
- Dissolution in the second hand
- Between 0 % and 10 %
- Transparent or colorless
- 4 litros / 15 litros
- Temperature of Application
- Do not apply below 5 ° Celsius