• -15%
Acrílica suelos Pav
EPOXI 2C Primer (Soils with Moisture) paint primers floor
Acrílica suelos Pav
EPOXI 2C Primer (Soils with Moisture) paint primers floor

EPOXI 2C Primer (Soils with Moisture)

€213.65 €251.35 -15%
Tax included

ADHERENT PRIMER EPOXY 2C (WITHOUT SOLVENT)

FOR SOILS WITH HUMIDITY

Epoxy primer without solvent, with excellent adhesion on any type of cementitious support.

Being suitable in supports with RESIDUAL MOISTURE

It can be mixed with aggregates to apply screeds.

Adherent primer in humidity.

It is not advisable in soils with permanent hydrostatic pressure.

KILOS
  • 8.64 KG (SET 5.64 + 3)
  • 18,72 KG ( GAME 12.22 + 6.5 )
Color
  • transparent


<b>10</b> By purchasing this product, you will accumulate 20 points with our loyalty program. You can convert 20 points in your account into a coupon for a future purchase.

 

IF YOU WANT TO KNOW MORE ABOUT EPOXY PAINT, CLICK HERE

IF YOU WANT TO KNOW MORE ABOUT PAINTING TWO COMPONENTS, CLICK HERE

.

# EPOXY COLORLESS IMPRIMATION TWO COMPONENTS WITHOUT DIVOLVENT, 100% SOLIDS, FOR SOILS WITH MOISTURE, CAN BE USED FOR RECRECIDES WITH ARIDES.

.

NATURE EPOXY PRIMER 2C COLORLESS FOR SOILS WITH HUMIDITY

Two-component system without solvents based on epoxy resins and suitable hardeners, which is used as a primer on substrates with moisture.

.

CHARACTERISTICS OF EPOXY 2C PRIMER FOR SOILS WITH HUMIDITY

This epoxy system stands out for its excellent adherent power on supports with humidity.

It has great moisturizing power in all types of cementitious substrates (concrete or mortar)

.

FIELDS OF APPLICATION OF THE PRIMER FOR SOILS WITH HUMIDITY EPOXY 2C

System recommended as a primer for epoxy systems on supports with moisture.

Not applicable to substrates with permanent hydrostatic pressure.

.

HOW TO USE THE EPOXY 2C PRIMER FOR SOILS HUMIDITY

  1. The concrete or mortar support on which it is applied must not be waterlogged, free of dust, grease and remains of poorly adhered materials.
  2. Mix the two components in the indicated proportion and homogenize the contents of the container by stirring thoroughly with a stirrer at low revolutions to avoid introducing air.
  3. The preparation of the support must be carried out with the appropriate machinery (diamantadora, milling machine, shot blasting machine), depending on the state of the support and subsequently vacuumed.
  4. The application will be by roller or trowel depending on the thickness you want to achieve.
  5. The drying time depends on the temperature and humidity, on supports with high humidity it may be necessary to wait up to 24 hours.
  6. It is not advisable to apply on the dry primer after more than 48 hours.
.

SAFETY AND HYGIENE WHEN USING EPOXY PRIMER 2C WITHOUT SOLVENT

Perform good ventilation of the premises and have a good extraction system.

Use active carbon mask, safety glasses and protective gloves during application.

.

PRESENTATION OF THE EPOXY 2C PRIMER FOR SOILS WITH HUEMDAD

It comes in containers of:

Component A: 5.64 Kilos / 12.22 kgs

Component B: 3 kilo / 6.50 kgs

.

We guarantee the quality of our products in accordance with our General Terms and Conditions of Sale and Delivery.
Our advice on application technologies, whether verbal, written or through testing, is based on our current level of knowledge and experience. These are simple instructions that do not affect our responsibility and do not exempt you from the need to check for yourself whether the products we supply comply with the procedures and objectives you seek, carrying out your own controls and tests. The application and use of the products is beyond our control and is therefore solely your personal responsibility. We cannot be held responsible for results other than those presented here. Our security recommendations do not prevent you from defining your own measures, adapted to the conditions of your systems. We reserve the right to change the data contained herein without prior notice based on technological advances.

.

If you want to know the prices of the primer for floors with residual moisture of Epoxy of two components, you can consult it at the beginning of the page.

.

.

Theoretical performance
0.5 - 1 Kg / m2 (dependiendo de la rugosidad del soporte)
Repainted
De 10 a 24 horas
Useful of Application
Rodillo / LLana
Color
Transparent or colorless
Kilos
Juego de imprimación más catalizador 8.67 kgs
Useful life of the mixture
a 20º C 45 minutos
Solid in weight
100 %
Density
1 - 1.10 grs / cm3
Adherence to the support
Mayor 30 kgs/ cm2
I24
999 Items

You might also like

Reviews Reviews (2)

Based on 2 reviews - 0 1 2 3 4 5,00/5
0 1 2 3 4
(5/5

Imprimacion suelos con humedad

Puntuación total: 0 1 2 3 4

El producto es fantastico lo he usado para el suelo de un cobertizo que tengo y al pintar y de todo no se ha levantado la pintura me ha quedado perfecto


<b>10</b>
0 1 2 3 4
(5/5

Pintar el suelos con humedad en la bodega

Puntuación total: 0 1 2 3 4

La verdad que estoy encantado con el resultado, yo la he utilizado porque en el suelo de la bodega hay mucha humedad residual que no terminaba de secar y con esta imprimación he podido pintar el suelo sin peligro a que se me levante la pintura.
Recomendable el producto.


<b>10</b>
Pinterest

Portes Gratis Angar para pedido + 75 €