Painting Plastic Pearl Grey
PLASTIC PAINT COLOR PEARL GREY
Plastic paint colors for Interior and Exterior.
PEARL GREY plastic paint, very high decorative standard with high quality for high decoration, silky, smooth, matte and smooth finish, high washability, excellent coverage and performance.
Intermixable and suitable for lower them with white shades.
BUY PLASTIC GRAY PEARL PAINT FOR INTERIOR AND EXTERIOR WALLS, MONOCAPA BUY PLASTIC PAINT COLORS
COMPOSITION OF PLASTIC DECORATIVE PAINTING, MONOCAPA COLORS (Painting Gray Pearl)
Decorative painting, matte plastic exterior and interior emulsion based acrylic styrene.
Over 20,000 double rubs washability according to DIN 53778
CHARACTERISTICS OF PLASTIC DECORATIVE PAINTING, MONOCAPA COLORS (Painting Gray Pearl)
Matt plastic paint for decorative finishes of the highest level, with great quality, especially suitable as paint for high decoration, silky finish, smooth, matte and smooth.
Plastic and decorative paint with maximum washability and excellent coverage and performance.
Monocpa tones painting, are intermixable with each other and can be lowered with white.
MONOCAPA plastic paint formulated with additives fungicides and bactericides avoiding the creation and spread of micoorganisnos, has character ANTIMOHO.
WHERE CAN I USE PLASTIC DECORATIVE PAINTING, MONOCAPA COLORS? (Painting Gray Pearl)
Decorative Painting monolayer, especially suitable for painting walls and ceilings of your home, its easy brochabilidad, application and cleaning.
Plastic paint for protection and decoration of surfaces of plaster, concrete, plasterboard panels, precast concrete, masonry in general; horizontal and vertical surfaces.
Indicated plastic paint colors to paint walls, ceilings, facades, walls, etc ... both indoors and outdoors.
HOW DO I HAVE TO PAINT WITH PLASTIC DECORATIVE PAINTING, MONOCAPA COLORS? (Painting Gray Pearl)
If you want to give a first hand to use as a primer, dilute the paint with approx. 20% water.
For further games, painting with between 0% and 5% diluted water.
Give one or two hands to homogenize texture and desired coverage.
The masonry surfaces must be dry in order to allow moisture levels and alkalinity to decrease the maximum possible.
Sobro concrete or new cements will be expected to total set (approx 30 days)
If the surface is in good condition, remove dust and apply one or two coats of paint.
Diluting the paint is always recommended with approximately basito water per 5 kilos of paint
If the old surface is in poor condition should be removed loose and friable surfaces and proceed as in a new surface.
If the first painting is in the queue, tempera or lime must be removed or primed with a fixative background.
For the preservation of a paint sample for possible tweaks in the future, it should be kept in a closed pot (ie canning), without being diluted with water. (Dubo Remove paint before dilution)
The technical advice for the use and application of our products are given according to our best knowledge and information, the result of tests conducted in our laboratories and our experience gathered over the years customer service.
Paintings ANGAR, SC will not be responsible for problems caused by incorrect application of the products.
If you want to know the PLASTIC DECORATIVE PAINTING, MONOCAPA MALLOW PRICE IN COLOR, OR THE PRICE OF PLASTIC PAINT COLORS FOR INTERIOR AND EXTERIOR, you can consult it at the top of this page.
- Theoretical performance
- Between 5 and 8 square meters X Kilo X I Run (Depending on the support, if it is new or already it is painted)
- 2 hours
- Useful of Application
- BRUSH / ROLLER / AIRLESS
- Cleanliness Tool
- Dissolution of the first hand
- Between 10 % and 20 %
- Dissolution in the second hand
- Between 0 % and 10 %
- Higher than 20,000 double strokes according DIN 53778 STANDARD
- 1 KGS / 5 KGS / 23.5 KGS
- Time of dried to a temperature of 25 ºC and a relative dampness of 50 %
- To the tact 30 minutes
- Temperature of Application
- Between 5 and 35 centigrade degrees