- -20%
2C Epoxy Floors (High resistance Chemical)
PAINTING WITH HIGH CHEMICAL RESISTANCE FLOOR, EPOXI 2C
Two component epoxy system for interior floors and pavements requiring high resistance to chemicals.
Epoxy floor finishes that provides high resistance to abrasion.
Very good adeherencia on almost all types of pavement.
SEE TABLE OF RESISTANCE TO CHEMICALS BELOW
Floor paint BUY HIGH CHEMICAL RESISTANCE, two component epoxy FLOOR REQUIRING GREAT ABRASION RESISTANCE.
.
TABLE OF CHEMICAL RESISTANCE OF EPOXY FLOOR
WITH HIGH ABRASION RESISTANCE CHEMICAL
.
RESISTANT
|
RESISTANT CONDITIONED
|
non - resistant
|
≤ 25% ammonia water |
Acetone |
amines |
Gasoline |
n-butanol |
Chloroform |
Beer |
N-butyl acetate |
Acetic acid ≥ 30% |
n-butylether |
20-30% acetic acid |
methanol |
cyclohexane |
Ethanol ≥ 20% |
Methyl chloride |
gasoil |
Formaldehyde 35% |
Phenol |
≤ 5% acetic acid |
Monoclorobenzol |
85% phosphoric acid |
≤ 15% ethanol |
Sodium hypochlorite 16% |
Ác. Hydrochloric conc. |
ethylene glycol |
Hydrochloric acid 20-30% |
Nitric acid> 40% |
Vegetable juice |
trichlorethylene |
Sulfuric acid 80% |
Glycerin |
3% hydrogen peroxide |
|
Fish liver oil |
||
Linseed oil |
||
Milk |
||
≤ 50% lye |
||
Olive oil |
||
oxalic acid 10% |
||
perchlorethylene |
||
Petroleum |
||
Phosphoric acid ≤ 80% |
||
Castor oil |
||
≤ 10% nitric acid |
||
≤ 20% hydrochloric acid |
||
Saltwater |
||
Butter |
||
≤ 60% sulfuric acid |
||
soap solution |
||
Oil silicota |
||
Turpentine oil |
||
Carbon tetrachloride |
||
Water |
||
Came |
||
xylene |
.
NATURE OF PAINT EPOXY FLOOR 2C HIGH CHEMICAL RESISTANCE
two component epoxy paint, adduct cured high chemical resistance
.
CHARACTERISTICS OF PAINT EPOXY FLOOR 2C HIGH CHEMICAL RESISTANCE
- Excellent chemical resistance.
- Provides finishes with high resistance to abrasion.
- It has very good adhesion to most building materials such as concrete, mortar, cement, stone, steel, iron, etc.
- It can be manufactured in non-slip finish by adding loads of extreme hardness.
.
WHERE CAN I USE EPOXI PAINT FOR FLOORS HIGH CHEMICAL RESISTANCE 2C?
It is used as decorative and protective paint on garage floors, warehouses, workshops, walkways, etc ...
Not recommended its application to the outside as UV rays can damage the paint color.
HOW DO I HAVE TO PAINT A PAVEMENT WITH TWO COMPONENTS EPOXY PAINT FLOOR NEEDING CHEMICAL ABRASION RESISTANCE?
- The surfaces must be free of dust, grease and old paint.
- The substrate moisture content must be less than 7%.
- Do not apply below 10 ° C
- In concrete pavements you need to elapse at least 28 days to complete setting.
If the soil is not very porous (polished) must perform a mechanical treatment (diamond) to open the pores and achieve a good bond.
- Mix the two components in 4: 1 and homogenize the container contents thoroughly stirring.
- The application can be done by brush, roller or air-less.
- The first coat is applied diluted by 10-15% with our Epoxy Solvent.
- The second coat is applied, you trascurridas 12-36 hours, diluted between 5 and 8% epoxy solvent
- The pavement may be stepping past 48 hours.
.
PRECAUTIONS WHEN USING EPOXY PAINT WITH HIGH CHEMICAL RESISTANCE 2C
Make a good ventilation in the room and have a good extraction system.
Using activated carbon mask, safety goggles and protective gloves during application.
For more information see the data sheet for the product safety.
PRESENTATION 2C SOLVENT EPOXI PAINTING WITH HIGH CHEMICAL RESISTANCE
It is available in packs of:
Component A: 4 kilos and 16 kilos
Component B: 1 kilo and 4 kilos
Technical advice for use and use of our products are given according to our best knowledge and information, the result of tests conducted in our laboratories and our experience gathered over the years customer service.
ANGAR paintings, SC will not be responsible for problems caused by improper application of the products.
.
if you want to know the price of paint for floors and floors with high chemical resistance you should check the top of this page.
BUY EPOXY PAINT FOR INTERIOR FLOORS NEED A PROTECTION ABRASIVES OR CHEMICAL.
.
.
- Repainted
- Minimum 12 hours / maximum 24 hours (elapsed this period, it is necessary to sand the surface for repainting)
- Theoretical performance
- Between 8 and 10 square meters per Kilo and Hand (Depending on the media, whether it is new or already painted)
- FINISH
- Brilliant in Smooth / Satin non-slip
- Solvent
- Disolvente Epoxi
- Useful of Application
- BRUSH / ROLLER / AIRLESS
- Cleanliness Tool
- Solvent Epoxi
- Dissolution of the first hand
- Between 10% and 15%
- Dissolution in the second hand
- Between 5 % and 10 %
- Proportion of the mixture
- 4: 1 (4 Epoxy parts: 1 part catalyst)
- Useful life of the mixture
- 6 hours at 20 degrees Celsius
- Density
- 1.20 - 1.40 grs/cm3
- Humedad del soporte
- Inferior al 10 %
Reviews (1)
Pintura





Compré este producto y está comprobado la resistencia a los productos quimicos que tiene esta pintura, muy buena calidad y excelente atencion al cliente, repetiré para pintar la fachada de nuestra nave, muchas gracias!!