Painting POLIURETANO Floors (Flame Retardant Certificate BS2-D0))

IF YOU WANT TO KNOW MORE ABOUT THE PAINTING OF TWO COMPONENTS CLICK HERE

BUY PAINT POLYURETHANE FOR SOILS CLASSIFIED IGNIFUGA according to the fire reaction tests UNE-EN 13823: 2012, UNE EN ISO 1716: 2011 AND UNE EN ESO 11925-2: 2011, to obtain a fire classification according to UNE EN 13501 -1: 2007 + A1: 2011, OBTAINING A CLASSIFICATION B-s2, d0

.

IF YOU WANT TO KNOW MORE ABOUT FIRE PROTECTIVE PAINTS, CLICK HERE

Our 2-component polyurethane paint for floors, in its anti-slip finish, is CERTIFIED TO SLIDING IN CATEGORY 3

.

COMPOSITION OF POLYURETHANE PAINT FOR TWO COMPONENT FLOORS

Two-component system based on a system of hydroxylated acrylic resin cross-linked with aliphatic polyisocyanates.

We can manufacture the polyurethane for floors in version ANTIDESLIZANTE Matt, consult us !.

.

CHARACTERISTICS AND ADVANTAGES OF TWO-COMPONENT POLYURETHANE PAINT FOR FLOORS

With this type of system, coatings with good gloss retention and excellent resistance to the exterior, water and chemical agents are obtained.

The polyurethane enamel for floors is characterized by its good elasticity, adherence and high hardness.

.

WHERE CAN I APPLY THE POLYURETHANE PAINT OF TWO COMPONENTS FOR SOIL?

Indicated to protect and decorate all types of concrete surfaces, such as parking lots and light traffic areas, finishing layers of industrial pavements and anti-dust treatments.

Painting of very excellent quality

.

HOW SHOULD I APPLY THE PAINT FOR TWO-COMPONENT POLYURETHANE SOILS?

The surface to be painted must be free of dust, grease, old paint and completely dry.

The humidity of the support must be less than 10%

Mix the two components in a 4: 1 ratio and mix the contents of the container thoroughly.

In new pavements it will be necessary to wait for its total setting, approximately 30 days; If the soil is not very porous, a chemical or mechanical treatment must be carried out to open and achieve better adhesion.

The application can be done with brush, roller or air-less.

The first coat will be applied by diluting the product with 5-10% polyurethane solvent.

To achieve good adhesion between layers, do not allow more than 24 hours to elapse.

.

PRECAUTIONS WHEN USING TWO COMPONENT POLYURETHANE PAINT

Perform good ventilation of the premises and have a good extraction system.

Use active carbon mask, safety glasses and protective gloves during application.

.

PRESENTATION OF TWO COMPONENT POLYURETHANE PAINT

It comes in containers of:

Component A: 3 kilos and 15 kilos

Component B: 0.75 kilos and 3 kilos

.

We guarantee the quality of our products in accordance with our General Terms and Conditions of Sale and Delivery.
Our advice on application technologies, whether verbal, written or through testing, is based on our current level of knowledge and experience. These are simple instructions that do not affect our responsibility and do not exempt you from the need to check for yourself whether the products we supply comply with the procedures and objectives you seek, carrying out your own controls and tests. The application and use of the products is beyond our control and is therefore solely your personal responsibility. We cannot be held responsible for results other than those presented here. Our security recommendations do not prevent you from defining your own measures, adapted to the conditions of your systems. We reserve the right to change the data contained herein without prior notice based on technological advances.

.

If you want to know the PAINTING PRICE FOR INDOOR AND OUTDOOR FLOORS OF TWO-COMPONENT POLYURETHANE, you can consult it at the beginning of this page.

.

.