• -15%
Pintura al silicato

SILICATE AND SILICONE PAINT (Breathable / Waterproof)

€39.08 €45.98 -15%
Tax included

ECOLOGICAL MINERAL SILICATE COATING WITH SILICONE GEL (Breathable)

IT CAN BE APPLIED OVER OLD PAINTS (ACRYLIC, VINYL ...)

Finishes highly permeable to water vapor and waterproof.

Paint that does NOT form a film and is highly adherent.

DOES NOT FALL WITH MOISTURE , does not leave bubbles

Compatible with relatively recent PAINTED OR UNPAINTED render

Very resistant to light and aggressive environments

Good resistance to color aging

WHITE COLOR / SOFT COLORS from the NCS CHART or ROOM SIMULATOR

 

For more information on How to order a color from the NCS or RAL Color Chart or the ENVIRONMENT SIMULATOR, CLICK HERE!

Product customization

Don't forget to save your customization to be able to add to cart
  • optional 250 char. max
LITERS
  • 4 L
  • 15 L
Color
  • White
  • Pastel colors letter ncs
  • ENVIRONMENT SIMULATOR
FINISH
  • Matee

 

Silicate paint ORDER TO APPLY IN WALLS WITH MOISTURE buy silicate coating, silicate mineral BUY PAINT

.

IF YOU WANT TO KNOW MORE ABOUT Silicate paint, CLICK AQU I

COMPOSITION OF THE SILICATE PAINT AND SILICONE GEL

Inorganic coating with a mineral structure formulated based on a mixture of silica colloid with potassium silicate and inorganic pigments.

     

CHARACTERISTICS OF SILICATE PAINT WITH SILICONE GEL

  • Breathable.
  • Resistant to atmospheric agents and aggressive environments.
  • It does not form a film.
  • Excellent resistance to light.
  • Highly stable colors.
  • Good thermal properties. 
  • Easy to apply.

Paint that is used on walls with humidity problems and in which you want to give total breathability . 

Inorganic mineral coating that combines silicate resins and silica additives to achieve finishes that do not deteriorate due to the effect of atmospheric agents.

The result of its application is highly breathable and abrasion resistant films, as well as being compatible with countless substrates.

It can be applied on mineral surfaces such as lime and cement, and on any type of plastic paint for facades and walls, both indoors and outdoors.

- The Silicasol coating does not form a film, it leaves a layer permeable to water vapor and highly resistant to light and aggressive environments. -

This painting stands out for four very relevant properties ;

-It is compatible with relatively recent plasters that contain an active alkalinity. (Walls or walls of plaster, cement, etc .. freshly made)

-It has good thermal insulation properties from the wall.

-G ran stability even under humid conditions, of highly variable support.

-Combines these properties of a potassium silicate paint together with the versatility of applications on organic substrates

-It is a fire-retardant paint, easy to apply and totally ecological, since it does not contain any type of solvents .

- Due to its formulation it is impervious to rainwater .

- Good resistance to color aging

Highly recommended for the protection and rehabilitation of all types of construction surfaces, especially suitable for places where there is continuous humidity , or a strong external aggression from sun, water, sea, etc.

 

   

FIELDS OF APPLICATION FOR SILICATE PAINT

  • Exterior Interior.
  • Houses and facades. Organic substrates and relatively recent plasters.
  • Metallic surfaces.


SUITABLE SUPPORTS:

  • New or old cement, sand and lime plasters 

  • On organic paints bound with dispersions and silicones (acrylic, vinyl paints and coatings ...

  • New or old (interior) sand and lime mortars.

  • Concrete surfaces.

  • Brick walls (without enamel).

  • Fiber cement boards.

  • Plaster surfaces (pretreated)

  • Metal surfaces (especially aluminum and galvanized steel)

  • Natural or artificial stone walls (porous).

   

INADEQUATE SUPPORTS:

  • Plastics

  • Wood.

  • Oil paint, plastic paints.

 

    

   

 

WHERE TO USE DECORATIVE SILICATE PAINT with SILICE?

Outdoors it is recommended for the protection and rehabilitation of facades .

For interiors where there is humidity and the plastic paint comes off the wall. 

When you want to respect the breathability of the support. Fully breathable and waterproof paint

Unlike resin bonded paints, silicate paints adhere to the mineral support through an insoluble chemical reaction (called silicification or petrification), and do not form a surface film.

The breathability - or permeability to water vapor - of silicate paint is equivalent to that of the support on which it is applied.

Surfaces painted with silicate paints are characterized by an  alkaline pH that provides natural protection against the proliferation of microorganisms (algae, molds, lichens)

    

  

HOW TO USE THE DECORATIVE SILICATE PAINT WITH SILICA?

 

- The surface to be painted must be free of dust, grease and old paint in poor condition; For this, it is convenient to scrape and prepare the surface with our Silicate Primer , or silicasol primer, especially on porous surfaces.

- To dilute it, use a silicate primer and then apply two or three coats of the product at an interval of at least 12 hours.

- Homogenize the contents of the container by stirring thoroughly.

- The application can be done with a brush, roller or air-less equipment.

- The first coat will be applied by diluting 20% ​​with Silicate Primer ,

for the second coat it is diluted 5-10% with Silicate Primer

- Do not apply below 5º C

 

 

  TECHNICAL DATA

A Cabado:                      Mate Mineral

Density:                     1.40 - 1.50 grs / cm 3 (slight variations depending on the color)

Theoretical yield:     8 - 10 m 2 / liter

Repainted:                   12 hours

Thinner: Silicate primer

Solids by weight:           55 - 57%

Solids by volume:    36 - 38%

Colors: White and soft colors (consult)

(*) There may be minimal differences both to the reference color and between one batch and another .

 


    

SAFETY AND HYGIENE, PRECAUTIONS WITH SILICATE PAINT

 

 

Does not require special precautions regarding toxicity. It is not polluting nor does it contain solvents

STORAGE

The product must be stored in its original container, perfectly closed and in places protected from the sun and excessive cold. We recommend temperatures between 5 and 35ºC.

PRESENTATION

It comes in 4 liter and 15 liter containers

 

   

   

   

We guarantee the quality of our products in accordance with our general conditions of sale and supply.

The technical advice for the use and use of our products is given according to our best knowledge and information, the result of tests carried out in our laboratories and our experience gathered over the years at the service of the client.  

   

If you want to know THE PRICE TO BUY SILICATE PAINT IN WHITE COLOR, you can check it at the beginning of this page.

   

BUY SILICATE PAINT TO APPLY ON WALLS WITH MOISTURE, buy silicate coating, BUY SILICATE MINERAL PAINT 

BUY DECORATIVE SILICATE PAINT IN WHITE AND COLORS FOR THE REPAIR OF OLD WALLS (SILICONE PAINT)

   

BUY SILICATE PAINT FOR WALLS WITH RESIDUAL MOISTURE. BUY PAINT THAT DOES NOT FALL WITH MOISTURE

 

Theoretical performance
Between 8 and 10 square meters per Kilo and Hand (Depending on the media, whether it is new or already painted)
Repainted
12 hours at 20 ° Centigrade
FINISH
Mineral matt
Solvent
Imprimación Silicato
Useful of Application
BRUSH / ROLLER / AIRLESS
Cleanliness Tool
Water
Dissolution of the first hand
20%
Dissolution in the second hand
Between 5 % and 10 %
Color
WHITE
Liters
4 litros / 15 litros
Temperature of Application
Do not apply below 5 ° Celsius
R19 -Silicasol

You might also like

Reviews Reviews (0)

Based on 0 reviews - 0 1 2 3 4 0/5
Product added to wishlist
Product added to compare.

Portes Gratis Angar para pedido + 75 €

iqitcookielaw - module, put here your own cookie law text