IRON ENAMEL Industrial (CUSTOM COLORS)
SYNTHETIC IRON PAINT (Quick Dry) GLOSS FINISH
COLORS TITAN / CARTA NCS / CARTA RAL / BLANCO / BLACK
Recommended as a finishing glaze for all types of iron supports, Perfect as finishing both outdoors and indoors , high brightness and duration
It allows a quick manipulation of the painted pieces.
Excellent gloss, appearance and color retention . High quality finish of all kinds of objects, where a flawless and durable finish is needed.
Very high covering power. It does not yellow, it does not settle, it does not form skins
Product customizationDon't forget to save your customization to be able to add to cart
BUY INDUSTRIAL SYNTHETIC PAINT FOR IRON in GLOSS finish, or BUY INDUSTRIAL SYNTHETIC FAST DRY ENAMEL FOR GLOSSY IRON
FOR ORDERS OVER 150 KGS, CHECK PRICE AND AVAILABILITY.
NATURE OF INDUSTRIAL SYNTHETIC ENAMEL FOR IRON
Synthetic enamel based on alkyd resins with medium content in non-yellowing oil.
CHARACTERISTICS OF INDUSTRIAL SYNTHETIC PAINT OR GLASS FOR IRON
- Industrial Enamel stands out for its rapid drying and its high resistance to weathering.
- It provides films with very good adhesion, great hardness and flexibility, due to its high gloss, in addition to protecting the support, it is very decorative.
- High quality interior and exterior wood paint for an excellent finish.
FIELDS OF APPLICATION OF INDUSTRIAL PAINT FOR IRON
Due to its properties it is recommended, indoors and outdoors, for the protection of all types of metal or wooden supports.
Wood paint, to paint windows, shutters, fences, wooden beams, porches, change color of home furniture, etc.
When applied by spray or Airless, give your old doors and furniture a chance to renovate your home.
(If you want a lacquered effect, better buy a polyurethane wood enamel.)
HOW SHOULD I USE SYNTHETIC INDUSTRIAL IRON ENAMEL?
- The surfaces to be painted must be free of dust, grease and old paint; on new surfaces a first coat of primer is required.
- Homogenize the contents of the container by stirring thoroughly.
- The application can be done with a brush, roller or air-less. (We recommend for a perfect completion the application with Airless or spray gun, since due to its quick drying, if we want to review the piece, we can leave marks with the brush, if we do not have experience in the application of industrial paint).
- The first coat will be applied by diluting 10-20% with our Industrial Solvent; for subsequent coats do not dilute more than 5%.
SAFETY AND HYGIENE WHEN USING IRON SYNTHETIC FAST DRYING ENAMEL
Carry out good ventilation of the premises and have a good extraction system.
Use activated carbon mask, safety glasses and protective gloves during application.
PRESENTATION OF THE INDUSTRIAL PAINT OF QUICK DRYING FOR IRON
It comes in packages of 4 liters and 20 liters.
We guarantee the quality of our products in accordance with our general conditions of sale and supply.
The technical advice for the use and use of our products is given according to our best knowledge and information, the result of tests carried out in our laboratories and our experience gathered over the years at the customer's service.
If you want to know the PRICE OF THE INDUSTRIAL SYNTHETIC PAINT OF FAST DRYING FOR IRON, OR THE PRICE OF INDUSTRIAL SYNTHETIC ENAMEL FOR IRON, you can consult it at the beginning of this page.
- Theoretical performance
- 14 -18 m2 X Litro X Mano
- 6 - 8 Horas
- Brillo / Satinado
- Disolvente Decoración
- Useful of Application
- Brocha / Rodillo / Airless
- Cleanliness Tool
- Solvent Decoration
- Dissolution of the first hand
- Entre un 5% y un 10%
- BLANCO / NEGRO / CARTA COLORES TITAN / CARTA COLORES NCS
- 0.750 LITROS / 4 LITROS /
- Temperature of Application
- No aplicar por debajo de 5ºC
- Humedad del soporte
- Inferior al 10 %