• Reduced price
Barniz Mate
Barniz Mate
Barniz Mate
Barniz Mate

Fireproof varnish Certificate (Polyurethane 2C)

€42.59 €53.24 -20%
Tax included

FIREPROOF VARNISH acrylic polyurethane 2 C (Anti Fire)

Polyurethane varnish all media, when we want Ignifugo or not.

Recommended for iron, aluminum, wood, flooring, glass and some plastics, Interior and Exterior.

CLASSIFICATION certificate B-s2, d0 IGNIFUGO

It provides high adhesion and flexibility, high hardness and chemical and mechanical resistance.

KILOS
  • 3.35 KG (SET 2.6+0.75)
  • 16 KG (SET 13 +3 )
Color
  • transparent
FINISH
  • Satin
  • Very brilliant

Buy varnish two-component polyurethane or anti FIREPROOF FIRE

.

IF YOU WANT TO KNOW MORE ABOUT TWO COMPONENT PAINT CLICK HERE

IF YOU WANT TO KNOW MORE ABOUT THE FIREPROOF VARNISH CLICK HERE

IF YOU WANT TO KNOW MORE ABOUT TO PAINT MUST APPLY, CLICK HERE, PLEASE NOTE THE MOST APPROPRIATE TO SITUATION varnish.

.

.

COMPOSITION polyurethane varnish IGNIFUGO OR ANTI FIRE WOOD


Component polyurethane varnish based on a system of hydroxylated acrylic resin crosslinked with aliphatic polyisocyanates.

IGNIFUGO classified material, according to fire reaction tests UNE-EN 13823: 2012, EN ISO 1716: 2011 and UNE EN ESO 11925-2: 2011, for obtaining a reaction to fire classification according UNE EN 13501-1 : 2007 + A1: 2011, obtaining a B-s2, d0 classification gloss and satin finish.

.

FEATURES polyurethane varnish 2 C IGNIFUGO O FIRE BARRIER


Suitable for finishing and protection of surfaces indoors or outdoors, provides high adhesion and flexibility as well as a great hardness and chemical and mechanical resistance.

.


WHERE TO USE CERTIFIED FIREPROOF POLYURETHANE VARNISH TWO COMPONENTS?


Recommended for the protection and decoration of wood, all metal surfaces and some plastic surfaces, also on light metals (aluminum, galvanized steel, glass) for As, or both inside and outdoors.

Being a fireproof paint, prevents the spread of fire, especially recommended for wooden houses, bars, restaurants, fire doors, etc ...

It can be used as primer two component polyurethane, for plastic or hard anchoring irons.

.


HOW TO USE VARNISH two component polyurethane IGNIFUTO CERTIFICATE OR ANTI FIRE?


- The surfaces must be free of dust, grease and old paint. 
- Mix the two components in proportion 4: 1 and homogenize the contents are thoroughly stirring. 
- Application can be by brush, roller or airless. 
- The first coat is applied by diluting 25% with our Polyurethane Solvent; for subsequent hands diluted approximately 10%. 
- To achieve good adhesion between coats must not let pass more than 24 hours.

.


PRECAUTIONS WHEN USING VARNISH two component polyurethane


Make a good ventilation in the room and have a good extraction system. 
Use activated carbon mask, goggles and gloves during application.

.


PRESENTATION OF FIREPROOF POLYURETHANE VARNISH WOOD 
It is available in packs of:

Completion packaging gloss, satin

Component A: 2.6 kilos and 13 kilos

Component B: 0.75 Kilos and 3 kilos

.

Technical advice for the use and application of our products are given with best knowledge and information, the result of tests conducted in our laboratories and our experience gained over the years customer service. 
ANGAR paintings, SC will not be responsible for problems caused by incorrect application or misuse of our products.

.

If you want to know the polyurethane varnish PRICE OR CERTIFIED FIREPROOF FIRE BARRIER, two-part iron, wood, floors, etc .. you can consult at the start of this page.

.

.

Repainted
  Minimum 8 hours / maximum 24 hours (elapsed this period, it is necessary to sand the surface for repainting)
Theoretical performance
Between 10 and 12 square meters Kilo X X Hand (Depending on the media, it is new or already painted)
FINISH
Brightness / Satin
Solvent
Disolvente Poliuretano
Useful of Application
BRUSH / ROLLER / AIRLESS
Cleanliness Tool
Solvent Polyurethane
Dissolution of the first hand
Between 20 % and 25 %
Dissolution in the second hand
10% Solvent
Color
Transparent or colorless
Kilos
JUEGO 2.6 K Y 0.75 KGS / JUEGO 13 K Y 3KGS
Time of dried to a temperature of 25 ºC and a relative dampness of 50 %
TOUCH: 1 hour
Temperature of Application
Do not apply below 5 ° Celsius
Proportion of the mixture
4: 1 (4 Epoxy parts: 1 part catalyst)
Density
0.90 - 1 grs / m3
certificado
Flame retardant B-s2, d0
Humedad del soporte
Inferior al 10 %
Irupol s

Reviews Reviews (1)

Based on 1 review - 0 1 2 3 4 5,00/5
0 1 2 3 4
(5/5

Material Ignifugo

Puntuación total: 0 1 2 3 4

La aplicación ha resultado facil gracias a todas las indicaciones, la verdad que el resultado ha sido impresionante, muchas gracias, nos costó encontrar un material asi en otras páginas con tan buena calidad. Nosotros lo compramos para pintarr y proteger las puertas de casa, nos han quedado muy bien barnizadas, pero como hemos tenido tan buena experiencia hemos decidido cubrir otras superficies.. ¡han quedado como nuevas !.

Lo recomiendo, gracias por vuestra amabilidad.


Product added to wishlist
Product added to compare.

Portes Gratis Angar para pedido + 75 €

iqitcookielaw - module, put here your own cookie law text