Varnishes, choosing the right
Determine its composition and finished product should be used on every surface.
Varnishes protected. Especially those parts or areas exposed to wear resistance due to earn their action. Improve outcome finishes professionals, while achieving durability. According to the surface or material on which want to apply, there are different types of varnishes. Choosing the right ensures a perfect finish.
The painting and woodwork are enhanced by varnishes. Camouflage scratches, cracks, protect against fire or counteract the effect of moisture and water vapor in rooms such as the bathroom or kitchen. Mostly they applied on the floor and furniture, outside.
BASICS TO CONSIDER BEFORE CHOOSING THE FINISH
VARNISH HIDRÓFUGO.-
Water-resistant varnish is a varnish that repels water, and it is not waterproof. When applied, the water slides, but over time loses that property, not sisrve for impoundment of water.
It can be applied, when we do not need proof, but we want to secure the bracket.
Normally hydrophobic coatings are breathable, are breathable support
BANIZ IMPERMEABLE.-
A waterproof coating, can never be breathable, as they create a laminated layer. A good waterproof varnish, must resist the impoundment of water (puddles on the floor, cleaning with hoses, etc ...)
VARNISH COLORLESS OR TRANSPARENTE.-
The colorless or transparent varnish, is one that when applied, shows the support, but we also have to consider, which will vary their appearance visually, in that it will raise the pitch of the support.
For example, on a stone, brick, etc ... will give a wet effect. If we want to know how we will apply more or less, I soloo have more than dip a little wall, to see the final pitch after applying the varnish.
VARNISH INVISIBLE.-
The invisible coating is one that after application, are not visually note any difference with the piece that is not painted.
We can use when we want to varnish the stone walls inside, and do not want us to raise the tone of support.
VARNISH VARNISH SOLVENT OR TO Water.-
The great difencia between the two, is the smell. The waterborne not smell when applied, and do not need a back ventilation, such as solvent based varnishes (1 or 2 days a little smell). The sites where to apply, can be used immediately with water barniceds.
The difference is, that if we need more quality in the varnish, whether for impermeablizar for fastening to greater support for greater hardness or resistance to external transit agents, etc .. The solvent based coatings, They tend to be of higher quality and more resistance.
WHAT DO I HAVE TO ANSWER QUESTIONS BEFORE CHOOSING THE PAINT?
- Do I need a waterproof paint, or want to protect and secure the bracket?
Varnish will ya mind that raise the tone of the material to be varnished? I want to raise the tone of Support!
Do I want a breathable coating, stop breathing support?
Where I will apply the varnish ?, in a floor, wall, wood. Will you be traveled by people or cars?
Need I water-based varnish or solvent can be?
Once we have cleared up on these questions, as we may decide that we should use VARNISH
PAINT FOR EXTERIOR WALLS OR FACADES
IF YOU WANT TO BUY PAINT FOR EXTERIOR WALLS or facades, CLICK HERE
We have different kinds of paints, to suit all needs.
This varnish will use it, when our purpose is to waterproof the support. A waterproof coating of excellent quality, which allows the impoundment of water, both fresh and salt water.
Waterproof coating, which can be used for floors, walls, roofs, gutters joints, joint between roof and wall, pools, arcades, terraces and all media.
Passable, for trafficking varnish.
We must bear in mind that this varnish is transparent and colorless, but we raise the tone of the support, and the finish is satin.
It is a varnish solvent
This varnish will use it, when our purpose is, hold and portege the media. Breathable coating, which does not create a layer on the support.
Water-resistant coating that repels water, but not waterproof.
Very appropriate for the protection of brick, stone and masonry.
This breathable exterior varnish is colorless and transparent, so we raise the tone of support when you apply, and the finish is glossy.
It is a varnish solvent.
REPELLENT VARNISH, INVISIBLE, SOLVENT
This varnish, we can use when we want a veneer INVISIBLE, that note is not applied.
We must bear in mind that is not waterproof.
This waterproof varnish, WWhat can use to varnish interior stone, brick, etc ... in which we want to secure the support (to prevent dust or loose wall EARTH) but do not want any change to appreciate on the wall.
It is a varnish solvent, invisible finish.
BANIZ REPELLENT, INVISIBLE, THE WATER
Water-based varnish, which does not smell when applied, or need further ventilation. You can use the room when varnished.
It is an invisible VARNISH, no visual change is noted in the support, once applied.
It is a repellent coating that repels water, but not a varnish raincoat because it is breathable.
This varnish we can use, for interior walls, they do not need a higher quality weather or air assault, for the attachment of dirt and dust from the walls of stone, brick, etc ...
It is a water-based varnish, with invisible finish.
Latex concentrate is a water-based varnish, which can be used on painted walls, cheap or low quality paints, tempera paint or lime, and serves to create a hydrophobic layer that gives the brilliant films stand for easy cleaning and high adhesion.
It is waterproof and its completion is bright.
BANIZ FOR WOOD
Want to buy wood varnish, CLICK HERE
WE DO BIG THREE GROUPS WITHIN wood coatings
BARNICES open pore or LASUR WOOD
The baniz open to wood pore is a varnish that does not create layer, so that over time, will disappear, but not create us descorches, and scales, and need not be sanded to reapply another coat of varnish or lasur, either at the time or when we should return to varnish the wood.
Applying this type of lasur or varnish for wood, we have to consider that not visually see, when the timber needs to return to being varnished, (because it did not create us flakes), but that does not mean that the wood is protected , deberem will review annually our windows or doors, etc .. so you do not cease to be protected.
FINISH closed pore O SINTÉTICO.-
The synthetic wood varnish is the most used for the protection and decoration of wood, it can be used on glossy, matte or satin finish.
It is a closed pore varnish, the wood leaves no sweat.
R provides high hardness films esistance rub and abrasion. Leaves no trace of the brush.
Very appropriate for the protection and decoration of wood in interior and exterior.
Washable even with household detergents.
VARNISH TWO COMPONENTS OR POLIURETANO.-
The polyurethane varnish of two components, is the highest quality and that supports a much stamina as mechanics.
This varnish will use it to wooden floors that will have movement of people, or mechanical or chemical rubbing.
We will use it when we want to give greater protection to our quality wood outside for air attacks.
The exterior wood varnish, has a FIREPROOF FIRE OR ANTI certification, and may use when tegamos walls, ceilings or wooden floors and want to give greater protection against fire, as it prevents the spread of fire.
FLOOR VARNISH
IF YOU WANT TO BUY banir FLOOR CLICK HERE
BIG THREE GROUPS HAVE TO FLOOR VARNISH: FOR WOOD FLOORS, FLOOR OF STONE, CONCRETE, ETC .. AND PAINTED FLOOR
PAINT FOR WOOD FLOORS
When we want to varnish the floor is wood, we can see the difference between coatings for wood floors in the previous point, BANIZ WOOD.
FLOOR FINISH STONE, TILE OR CONCRETE
When we want to varnish the floor, whether stone, printed concrete, masonry, brick, tile, etc ... We can inform the most appropriate for each situation support and varnish, use almost the same varnish for exterior walls or facades.
This varnish will use it, when our purpose is to waterproof the support. A waterproof coating of excellent quality, which allows the impoundment of water, both fresh and salt water.
Waterproof coating, which can be used for floors, walls, roofs, gutters joints, joint between roof and wall, pools, arcades, terraces and all media.
Passable, for trafficking varnish.
We must bear in mind that this varnish is transparent and colorless, but we raise the tone of the support, and the finish is satin.
It is a varnish solvent
This varnish will use it, when our purpose is, hold and portege the media. Breathable coating, which does not create a layer on the support.
Water-resistant coating that repels water, but not waterproof.
Very appropriate for the protection of brick, stone and masonry.
This breathable exterior varnish is colorless and transparent, so we raise the tone of support when you apply, and the finish is glossy.
It is a varnish solvent.
REPELLENT VARNISH, INVISIBLE, SOLVENT
This varnish, we can use when we want a veneer INVISIBLE, that note is not applied.
We must bear in mind that is not waterproof.
This waterproof varnish, WWhat can use to varnish interior stone, brick, etc ... in which we want to secure the support (to prevent dust or loose wall EARTH) but do not want any change to appreciate on the wall.
It is a varnish solvent, invisible finish.
BANIZ REPELLENT, INVISIBLE, THE WATER
Water-based varnish, which does not smell when applied, or need further ventilation. You can use the room when varnished.
It is an invisible VARNISH, no visual change is noted in the support, once applied.
It is a repellent coating that repels water, but not a varnish raincoat because it is breathable.
This varnish we can use, for interior walls, they do not need a higher quality weather or air assault, for the attachment of dirt and dust from the walls of stone, brick, etc ...
It is a water-based varnish, with invisible finish.
FINISH FOR SEALING OF CONCRETE
It is a varnish is used for its properties for sealing concrete floors printed.
It is used for sealing and protection of concrete, both decorative and printed concrete pavements.
High durability, well above most market products.
Very appropriate for the resin-concrete pavements printed.
Excellent resistance to water, Hydro-repellency.
PAINTED FLOOR VARNISH
Usually with a good paint for floors, we will need not varnish the floor after pinturarlo.
But neither this not the case, you can use any type of varnish, taking into account the type of paint applied on the ground there now.
You will never use a stronger paint varnish applied because the would remove this.
We advise you if this your case consult us personally, and our technicians can advise you individually, depending on the situation of the support and use.
Call us or contact us. We are happy to advise you.
.
.
Comments (21)